Hifiverse

CD / SACD players and transports — Primare CD35

Description, images, technical data and specifications

Primare CD35
Image source - (c) Primare

The CD35 is a full-size modular CD player from Primare of Sweden and part of the 35 series. This version has no network functions, but the SM35 Prisma network module can be added either at the time of purchase or at a later date. A TEAC drive, a balanced DAC stage and a balanced analogue output stage are combined in one chassis. MSRP is EUR 3,000.

Key specs that matter

Transport is a TEAC CD 5020A-AT, and the D/A converter is an ESS Sabre ES9028PRO. Analogue outputs, selectable fixed or variable, are one pair of RCA at 2.2 Vrms (370 ohms) and one pair of XLR at 4.4 Vrms (100 ohms). Digital outputs are 1x RCA coaxial and 1x Toslink. Frequency response is 20 Hz - 20 kHz (-0.3 dB), signal-to-noise ratio is 110 dB (AES17), and THD+N is below 0.01% (20 Hz - 20 kHz). Power consumption is 25 W in operation and 0.5 W in standby. Dimensions are 430 x 385 x 106 mm (W x D x H) with buttons and connectors, or 382 mm deep without them. Weight is 10.8 kg.

Engineering and use context

Primare describes the TEAC CD 5020A-AT as an isolated transport, adjustable for precise, smooth tray loading and low clamp noise. An internal I2S and SPDIF interface with buffered memory links it to the converter. Its ES9028PRO is a 32-bit, 8-channel PRO series chip based on ESS HyperStream technology, with a chip rating of 129 dB dynamic range and -120 dB THD+N. In the CD35 the ESS chip is used in a balanced D/A conversion scheme that is followed by a discrete analogue output stage with a hand-selected FET input section.

A linear power supply is combined with a switch mode standby supply that is turned off in playback mode to minimise noise. Circuit boards are 2- and 4-layer double-sided, with surface mount components used wherever possible. Each control button on the front panel is shaped for tactile feedback, a design approach Primare calls lagom. Control options are the C25 system remote, RS232, IR in/out and 12 V trigger in/out on 3.5 mm jacks. Finishes are black or titanium.

Pairing

An amplifier or preamplifier with balanced XLR or RCA line inputs is required in fixed output mode. Primare names the analogue-only I35 integrated amplifier as a partner, with the digital circuitry kept in the CD35. With the variable output selected, a pair of powered loudspeakers connects directly.

Alternatives

The CD35 Prisma is the same Primare player with the Prisma module installed, adding USB-A, Ethernet, Wi-Fi and streaming.

Specifications

  • Model name

    CD35

  • Transport

    Yes

  • Player

    Yes

  • SACD support

    N/A

  • Engine

    N/A

  • Frequency response low +/- 3dB (for CD) (Hz)

    N/A

  • Frequency response high +/- 3dB (for CD) (Hz)

    N/A

  • Frequency response low +/- 3dB (for SACD) (Hz)

    N/A

  • Frequency response high +/- 3dB (for SACD) (Hz)

    N/A

  • Gain (dBu)

    N/A

  • Output Level (balanced) (V)

    N/A

  • Output Level (single-ended) (V)

    N/A

  • Input Impedance (balanced) (Ω)

    N/A

  • Input Impedance (single-ended) (Ω)

    N/A

  • Output Impedance (balanced) (Ω)

    N/A

  • Output Impedance (single-ended) (Ω)

    N/A

  • Dynamic range (for CD) (dB)

    N/A

  • Dynamic range (for SACD) (dB)

    N/A

  • Signal to Noise Ratio (for CD) (dB)

    N/A

  • Signal to Noise Ratio (for SACD) (dB)

    N/A

  • Total Harmonic Distortion + Noise (for CD) (%)

    N/A

  • Total Harmonic Distortion + Noise (for SACD) (%)

    N/A

  • Dimensions (mm)

    430 x 385 x 106

  • Weight (kg)

    10.8

  • Official link

More components