The CD140 is a CD player with tubes from Kora, a French manufacturer whose products are designed and built in Toulouse, in the Occitania region. It belongs to the 140 series together with the PR140 preamplifier and the DAC140 converter and shares their aluminium and steel case in mineral grey. Discs are its only source, and the rear panel carries an analogue output on RCA sockets with no digital inputs or outputs. The French launch price was EUR 6,960.
Key specs that matter
Sampling frequency is 768 kHz and conversion is 32 bits, with an AKM upsampler and a ROHM converter. Output level is 2.28 V for 0 dB, output impedance is below 50 ohms and bandwidth is 20 Hz - 20 kHz. High voltages are +240 V and -240 V stabilised, and tube heating runs on 12 V DC. Its power supply accepts 100 - 240 VAC at 50 or 60 Hz, with consumption below 40 W. Chassis size is 100 x 420 x 340 mm (H x W x D), the overall dimension is 118 x 420 x 355 mm and weight is 7 kg.
Engineering and use context
Two AKM integrated circuits make up the digital section. The first receives the signal from the disc and converts it to I2S format, and the second oversamples it and multiplies the number of converted samples by 16, so the filtering moves to higher frequencies and the conversion residue is removed from the audible band. A circuit developed by Kora keeps all digital clocks synchronised with the original CD signal.
After the ROHM DAC, the analogue section uses Kora's Square Tube operational amplifier with four double triodes, four triodes per channel. In this player it also performs pure analogue output filtering. Kora describes the Square Tube as a differential stage followed by an output stage close to an OTL push-pull, a complete operational amplifier that passes DC and keeps the tube bias self-stabilising. Its input triodes run at a fixed 2 mA from a current source, and the output tube currents are set by reference voltages well below their rated value. Two regulated high voltages, one positive and one negative, give 480 V in total.
At start-up the tubes are heated first and a microcontroller monitors the high voltages continuously. If a tube voltage fault appears, the display reports it and the player shuts down to protect the rest of the system. A single press-and-turn button opens the tray, selects tracks and enters a settings menu with repeat track, display brightness and encoder click volume. An RC5 infrared remote adds direct track numbers, fast forward, fast reverse and eject.
Pairing
A line-level input with RCA sockets is required. The matching preamplifier is the Kora PR140, and the Kora universal remote control covers all Kora devices.
Alternatives
The CD140 is the only CD player in the Kora range.