Hifiverse

CD / SACD players and transports — Rotel CD11 Tribute

Description, images, technical data and specifications

Rotel CD11 Tribute
Image source - (c) Rotel

The CD11 Tribute is a compact disc player from Rotel, a higher-performance edition of the CD11 engineered with hands-on support from Ken Ishiwata. Rotel announced the original CD11 in March 2019 at GBP 430, and the Tribute followed in September 2020 at USD 599, launched together with a Tribute edition of the A11 integrated amplifier. Ishiwata died in November 2019, and the loudspeaker designer Karl-Heinz Fink completed the work.

Key specs that matter

Frequency response is 20 Hz - 20 kHz (±0.5 dB). THD plus noise is 0.009% at 1 kHz, and intermodulation distortion is 0.009% at 1 kHz. Signal-to-noise ratio is >125 dB (A-weighted) and dynamic range is >99 dB. Channel separation is >115 dB at 10 kHz, channel balance is ±0.5 dB and phase linearity is ±0.5 degree. Analogue output impedance is 470 ohms. The coaxial digital output is 0.5 V peak to peak into 75 ohms. Power consumption is 15 W, below 0.5 W in standby. Dimensions are 430 x 98 x 314 mm (W x H x D), the front panel is 80 mm high, and net weight is 5.8 kg.

Engineering and use context

Rotel lists critical changes to the power supply and DAC circuits as the difference from the CD11, with a precise selection of components in the audio signal path. Conversion uses a Texas Instruments 24-bit/192 kHz stereo DAC, combined with what Rotel calls its Balanced Design. Discs load into a motor-driven tray of the tray-loading CD mechanism. If the tray is left open for 60 seconds without any operation, it closes automatically. MP3 support is listed alongside standard audio CD playback.

On the rear panel are a pair of RCA analogue outputs and a coaxial digital output. That digital output carries an unprocessed digital data stream for an outboard D/A converter or digital processor. A 12 V trigger input accepts AC or DC control signals from 3 V to 30 V and switches the player between active and standby. Rotel Link can be used instead with other units of the series, but the two connections should not be used together.

Front panel buttons duplicate most functions of the supplied RR-D99 infrared remote control. A back-lit display shows track and time information and the status of special features. Finishes are silver and black. Rotel has built CD players since the RCD-855 of 1989.

Pairing

An amplifier or preamplifier with an RCA line input is required for the analogue output. An outboard DAC with a 75-ohm coaxial input connects to the coaxial digital output. The matching amplifier is the A11 Tribute.

Alternatives

The Rotel CD14MKII is a CD player above the CD11 Tribute in the Rotel range, using a Texas Instruments 32-bit DAC in a chassis of the same size.

Specifications

  • Model name

    CD11 Tribute

  • Transport

    Yes

  • Player

    Yes

  • SACD support

    N/A

  • Engine

    N/A

  • Frequency response low +/- 3dB (for CD) (Hz)

    20

  • Frequency response high +/- 3dB (for CD) (Hz)

    20 000

  • Frequency response low +/- 3dB (for SACD) (Hz)

    N/A

  • Frequency response high +/- 3dB (for SACD) (Hz)

    N/A

  • Gain (dBu)

    N/A

  • Output Level (balanced) (V)

    N/A

  • Output Level (single-ended) (V)

    N/A

  • Input Impedance (balanced) (Ω)

    N/A

  • Input Impedance (single-ended) (Ω)

    N/A

  • Output Impedance (balanced) (Ω)

    N/A

  • Output Impedance (single-ended) (Ω)

    N/A

  • Dynamic range (for CD) (dB)

    >99

  • Dynamic range (for SACD) (dB)

    N/A

  • Signal to Noise Ratio (for CD) (dB)

    >125

  • Signal to Noise Ratio (for SACD) (dB)

    N/A

  • Total Harmonic Distortion + Noise (for CD) (%)

    0.009

  • Total Harmonic Distortion + Noise (for SACD) (%)

    N/A

  • Dimensions (mm)

    430 × 98 × 314

  • Weight (kg)

    5.8

  • Official link

More components