Hifiverse

CD / SACD players and transports - Audio Note CD Zero

Description, images, technical data and specifications

Audio Note CD Zero
Image source - (c) Audio Note

The CD Zero is the Level Zero Red Book CD player of Audio Note (UK) and the company's most cost effective CD playback system. Inside one compact chassis it combines simplified and integrated versions of two Zero-level separates, the CDT Zero/II transport and the DAC 0.1x converter. Audio Note (UK) says the player has been engineered for sonic performance rather than technical specification, and it meets all of the company's Entry Level criteria. The UK price is GBP 2,400, with a build time of around eight weeks.

Key specs that matter

Optical pick-up is a 3 beam laser with a 780 nm semiconductor laser. Reference output is 3.0 V RMS (approx.), output impedance is less than 2 kOhm, and channel balance is less than 0.25 dB. Mains input is AC 100-120 V / 220-240 V, 50/60 Hz, and maximum power consumption is 48 W. Dimensions are 98 x 300 x 270 mm (H x W x D, incl. connectors), and weight is 3.5 kg. Fascia options are anodised aluminium, black acrylic and white acrylic.

Engineering and use context

Discs are read by an in-house custom modified Philips front loading CD mechanism, designed purely to read Red Book CD. A Philips TDA1543 DAC chip is implemented in a non-oversampling, digital filterless circuit. Its analogue output stage is equipped with a 6111WA miniature dual triode.

On the rear panel there is one RCA socket per channel for the analogue outputs and a single RCA digital output. That coaxial output is for a separate digital to analogue converter or for digital recording or processing equipment. Mains enters through an IEC socket, and the mains switch sits on the back just above it. Fusing is 500 mA slow blow (T type) for 220-240 V supplies and 1 A slow blow for 100-120 V supplies.

Discs load on a front tray. Front panel buttons cover open/close, play/pause, stop and track skip. Its remote control adds search, repeat, random play, numbered track selection, a time button with three display modes, a display button that dims or switches off the display, and a programme memory of up to 32 tracks. The remote takes two AA batteries, which are not included. According to the manual, the player requires about two hundred hours of operation before the bedding in of its internal parts is complete.

Pairing

The analogue outputs connect to any line input of an amplifier (CD, Aux or Tuner). Audio Note (UK) recommends its AN-C interconnect for this connection. The digital output allows a later upgrade to an external DAC.

Alternatives

The CD 1.1x is the Level One player of Audio Note (UK), with the same TDA1543 and 6111WA circuit plus Audio Note (UK) Tin Foil output capacitors in a 445 mm wide, 5 kg chassis.

Specifications

  • Model name

    CD Zero

  • Transport

    Yes

  • Player

    Yes

  • SACD support

    N/A

  • Engine

    N/A

  • Frequency response low +/- 3dB (for CD) (Hz)

    N/A

  • Frequency response high +/- 3dB (for CD) (Hz)

    N/A

  • Frequency response low +/- 3dB (for SACD) (Hz)

    N/A

  • Frequency response high +/- 3dB (for SACD) (Hz)

    N/A

  • Gain (dBu)

    N/A

  • Output Level (balanced) (V)

    N/A

  • Output Level (single-ended) (V)

    3

  • Input Impedance (balanced) (Ω)

    N/A

  • Input Impedance (single-ended) (Ω)

    N/A

  • Output Impedance (balanced) (Ω)

    N/A

  • Output Impedance (single-ended) (Ω)

    <2000

  • Dynamic range (for CD) (dB)

    N/A

  • Dynamic range (for SACD) (dB)

    N/A

  • Signal to Noise Ratio (for CD) (dB)

    N/A

  • Signal to Noise Ratio (for SACD) (dB)

    N/A

  • Total Harmonic Distortion + Noise (for CD) (%)

    N/A

  • Total Harmonic Distortion + Noise (for SACD) (%)

    N/A

  • Dimensions (mm)

    98 x 300 x 270

  • Weight (kg)

    3.5

  • Official link

More components