The 8300CDQ is a CD player, DAC and preamplifier from the British company Audiolab, part of its 8300 Series. It draws on the circuitry of the 8300CD, the player that replaced the 8200CD and 8200CDQ in 2015, and adds an analogue preamplifier section with three line inputs and a dedicated headphone amplifier.
Key specs that matter
Conversion uses a 32-bit ESS Sabre32 9018 DAC chip. Five digital inputs are provided, one asynchronous USB and four S/PDIF (two coaxial, two optical), together with three stereo pairs of line-level RCA inputs. S/PDIF accepts 32 - 192 kHz, while USB accepts PCM from 32 to 384 kHz plus DSD64, DSD128 and DSD256. Output voltage is 4.2 Vrms ±0.1 on the balanced XLR output and 2.1 Vrms ±0.1 on the unbalanced RCA output, with an output impedance of 10 ohms. Frequency response is 20 Hz - 20 kHz (±0.2 dB) and THD is below 0.002% (1 kHz, 0 dB, 20 Hz - 20 kHz, A-weighted). Signal-to-noise ratio is better than 100 dB balanced and 98 dB unbalanced (A-weighted), and crosstalk at 1 kHz is below -130 dB balanced and -120 dB unbalanced. Standby consumption is below 0.5 W. Dimensions are 444 x 80 x 317 mm (W x H x D) and net weight is 6.0 kg.
Engineering and use context
Audiolab's chosen chip is an eight-channel hybrid multi-bit delta-sigma DAC with HyperStream architecture and ESS Technology's Time Domain Jitter Eliminator. Seven user-selectable filters are available for PCM data and four ultrasonic filters for DSD. Discs load through a slot-loading CD mechanism with a read-ahead digital buffer that reduces disc-reading errors, and it plays CD and CD-R.
In the preamplifier, line input signals pass to a precision analogue volume stage, and the internal layout protects this sensitive section from noise interference. A dedicated direct-coupled headphone amplifier with current-feedback circuitry drives the front 6.35 mm socket. Power comes from a large, low-noise toroidal transformer, and the supply has 29 regulated rails. Over USB, HID compatibility gives driverless control of a connected computer or media player. On the front is a 2.7-inch POLED display of 128 x 64 pixels, and a 12 V trigger sits on the rear panel.
Pairing
The analogue volume stage and XLR outputs allow the 8300CDQ to drive a power amplifier or powered loudspeakers directly. Matching power amplifiers are the 8300MB monoblock and the 8300XP stereo model. The 12 V trigger allows the power amplifier to switch on with the player.
Alternatives
The 8300CD is the Audiolab CD player and DAC without the analogue preamplifier section and line inputs.