Hifiverse

CD / SACD players and transports — Exposure 3510 CD Player

Description, images, technical data and specifications

Exposure 3510 CD Player
Image source - (c) Exposure

The 3510 CD Player is a CD player from Exposure Electronics, the British company based in Lancing, West Sussex. It arrived in March 2024 as the last model of the 3510 series, which started in 2021 with the 3510 Integrated Amplifier as the successor to the 3010S2D and grew to include a preamplifier, a stereo power amplifier and mono power amplifiers. Launch prices were GBP 2,500, EUR 2,999 and AUD 3,299. Finishes are black or titanium, and Exposure gives a three-year guarantee.

Key specs that matter

Output level is 2 V RMS. Frequency response is 20 Hz - 20 kHz (±0.25 dB), and total harmonic distortion is below 0.007% (20 Hz - 20 kHz, 0 dBFS). Signal-to-noise ratio is above 100 dB (A-weighted). Digital outputs are S/PDIF coaxial and Toslink optical. Mains supply is 110/120 V or 220/240 V at 50/60 Hz, set at the factory, with a T2AL fuse for 110/120 V units and a T1AL fuse for 220/240 V units. Power consumption is below 25 W. Dimensions are 440 x 90 x 300 mm (W x H x D), net weight is 5 kg and gross weight 6.5 kg.

Engineering and use context

Conversion uses a dual mono PCM1704 24-bit DAC. According to Exposure, this layout gives very high resolution and channel separation. A large toroidal power transformer has separate windings for the CD transport mechanism and for the audio stages. Its clock reference is a high-stability crystal oscillator, and a dedicated power supply regulator for the transport and audio stages is specified for low jitter.

After the DAC, the analogue section has a discrete output stage with multiple stages of regulation. Double-sided PCBs are used for layout and screening. All casework is aluminium, and Exposure states that the chassis minimises vibration and shields the circuitry from interference. For playback the CD display can be switched off from the supplied remote control.

Pairing

A line-level input on an integrated amplifier or preamplifier is required. The coaxial and Toslink outputs allow the player to work as a transport with an external DAC. Matching units are the 3510 Integrated Amplifier and the 3510 Pre-Amplifier.

Alternatives

The XM CD Player is the compact CD player of Exposure's XM series.

Specifications

  • Model name

    3510 CD Player

  • Transport

    Yes

  • Player

    Yes

  • SACD support

    N/A

  • Engine

    PCM1704

  • Frequency response low +/- 3dB (for CD) (Hz)

    20

  • Frequency response high +/- 3dB (for CD) (Hz)

    20 000

  • Frequency response low +/- 3dB (for SACD) (Hz)

    N/A

  • Frequency response high +/- 3dB (for SACD) (Hz)

    N/A

  • Gain (dBu)

    N/A

  • Output Level (balanced) (V)

    N/A

  • Output Level (single-ended) (V)

    N/A

  • Input Impedance (balanced) (Ω)

    N/A

  • Input Impedance (single-ended) (Ω)

    N/A

  • Output Impedance (balanced) (Ω)

    N/A

  • Output Impedance (single-ended) (Ω)

    N/A

  • Dynamic range (for CD) (dB)

    N/A

  • Dynamic range (for SACD) (dB)

    N/A

  • Signal to Noise Ratio (for CD) (dB)

    >100

  • Signal to Noise Ratio (for SACD) (dB)

    N/A

  • Total Harmonic Distortion + Noise (for CD) (%)

    <0.007

  • Total Harmonic Distortion + Noise (for SACD) (%)

    N/A

  • Dimensions (mm)

    90 x 440 x 300

  • Weight (kg)

    5

  • Official link