The MOON 260D is a CD transport with an optional 32-bit DAC in one chassis, designed and hand-assembled by MOON by Simaudio in Boucherville, Quebec, Canada. Its DAC section can be ordered from the start or added later, and a transport-only T version is offered to owners of a separate DAC. The 260D began in the Neo series at USD 2,000 for the transport plus USD 1,000 for the DAC, and its current price starts at USD 2,800.
Key specs that matter
With the DAC installed, frequency response is 2 Hz - 100 kHz (+0/-3 dB), THD is 0.005% (1 kHz, 0 dBFS, A-weighted) and intermodulation distortion is 0.005%. Dynamic range is 120 dB, signal-to-noise ratio is 120 dB at full output and channel separation is 116 dB. Intrinsic jitter is 1 ps RMS. Analogue output is 2.0 V at 0 dBFS on one pair of balanced XLR and one pair of single-ended RCA connectors, with 75 ohms output impedance. PCM is accepted at 16 - 24 bits and 44.1 - 192 kHz. Digital inputs are two S/PDIF (RCA) and one TosLink, and digital outputs are S/PDIF (RCA) and AES/EBU (XLR). Standby consumption is 0.5 W. Dimensions are 429 x 86 x 333 mm (W x H x D), and shipping weight is 7.5 kg.
Engineering and use context
Simaudio uses a proprietary CD drive system with in-house hardware and software, mounted on its M-Quattro gel-based 4-point floating suspension for vibration damping. A rigid chassis construction limits the effects of external vibration. Inside is an oversized power supply with up to 13 stages of voltage regulation, five for the transport and eight for the DAC.
Its 32-bit asynchronous DAC has upsampling, and the analogue signal path uses a DC servo circuit and a proprietary analogue filter. Both analogue output pairs are fixed level and can be used simultaneously. MQA data on a disc is passed through to the digital outputs for decoding in an MQA-certified DAC.
For integration there is an RS-232 port for bidirectional feedback and firmware updates, an IR input for aftermarket infrared receivers and SimLink in and out ports for two-way communication with other MOON components. After about 20 minutes of inactivity the unit goes into standby, a function that is disabled by holding the Program button for two seconds. A CRM-3 remote control with two CR-2032 batteries, a SimLink cable and an AC power cable come in the box.
Pairing
A preamplifier or integrated amplifier with a balanced XLR or single-ended RCA line input is required for the analogue outputs. The digital outputs allow an external DAC, and SimLink connects the 260D with MOON amplifiers.
Alternatives
The 260D is the only CD player in the current MOON range.