Hifiverse

Subwoofers - Dynaudio Sub 6

Description, images, technical data and specifications

Dynaudio Sub 6
Image source - (c) Dynaudio

The Sub 6 is an active DSP subwoofer from Dynaudio of Denmark. It uses two opposed drivers in a sealed enclosure, and its DSP holds performance maps for Dynaudio loudspeakers. With one of these maps selected, a two-way speaker system becomes a three-way system. The US price was USD 2,400.

Key specs that matter

Two 230 mm MSP+ Hybrid Drive units are mounted at either end of the sealed cabinet and are driven by a 500 W amplifier built into its base. Frequency range is 16 Hz - 230 Hz (85 dB, ±3 dB). The low-pass filter is adjustable or taken from a preset, the high-pass filter is adjustable, and phase is switchable between 0 and 180 degrees. Inputs and outputs are 2x balanced XLR and 2x unbalanced RCA. Mains input is 100 - 120 V or 200 - 240 V, 50/60 Hz, with auto on/off, 0.5 W standby consumption and 490 W maximum consumption. Dimensions are 447 x 300 x 268 mm (W x H x D) without feet and grille, or 470 x 333 x 268 mm with them, and weight is 21.5 kg. Finishes are black satin lacquer and white satin lacquer, both with a black grille.

Engineering and use context

Dynaudio developed the MSP+ Hybrid Drive units specifically for subwoofers. Their cones are made primarily from aluminium for stiffness. To counter ringing from the aluminium, a dual-action damping system combines paper damping on the back of the cone with a damping cap of Dynaudio Magnesium Silicate Polymer on the front. Its enclosure is wider than it is deep.

For each of its popular hi-fi loudspeakers, Dynaudio measured the acoustic characteristics and created a custom performance map. These maps are stored in the Sub 6 and are chosen from its display and menu system, after which the roll-off of the subwoofer is matched to the selected model. Presets cover Confidence, Contour, Evidence, Evoke, Special Forty, Legend and Focus XD models. Maps for new Dynaudio speakers are added by firmware update. Focus 10, 30 and 50 active speakers have no preset, and with them the Sub 6 crossover is set to bypass. With other loudspeakers, including other brands, crossover frequency, gain and phase are set manually. Once the distance from the subwoofer to the speakers is entered, the Sub 6 sets both time and phase delays automatically.

Pairing

A preamplifier or AV processor with a balanced or single-ended subwoofer output is required. Dynaudio loudspeakers from the preset list connect through the matching performance map.

Alternatives

The Dynaudio Sub 3 is the smaller sealed subwoofer in the range, with a single driver.

Specifications

  • Model name

    Sub 6

  • Frequency Response low +/- 3dB (Hz)

    16

  • Frequency Response high +/- 3dB (Hz)

    230

  • Sensitivity (dB at 1 W/1m)

    N/A

  • Impedance (Ohms)

    N/A

  • Has internal amplification

    Yes

  • Power amplifier (W)

    500

  • Size (sm)

    44.7 × 30.0 × 26.8

  • Weight (kg)

    21.5

  • Official link