Hifiverse

Subwoofers - Velodyne SPL-X 10

Description, images, technical data and specifications

Velodyne SPL-X 10
Image source - (c) Velodyne

The SPL-X 10 is the smallest model in the SPL-X series of powered subwoofers from Velodyne Acoustics, the subwoofer specialist based in Hamburg. Velodyne presents SPL-X as its subwoofer flagship line, continuing the SPL Ultra and DD series. All four models - SPL-X 10, 12, 15 and 18 - are closed-box designs that combine DSP control, a Class D amplifier, carbon fibre drivers and a fully parametric 6-band EQ. The UK price is GBP 2,999 in gloss black.

Key specs that matter

This is a sealed subwoofer with one 254 mm driver and a Class D amplifier rated at 1000 W RMS and 1500 W peak. Frequency response is 28-250 Hz (±3 dB) and 18-300 Hz (±10 dB). Its low-pass filter is adjustable from 30 to 200 Hz with slopes of 12, 24, 36 or 48 dB/octave, and delay is adjustable from 0 to 500 ms. Inputs are RCA stereo/LFE, XLR stereo/LFE and high-level stereo, and outputs are RCA stereo/LFE and XLR stereo/LFE. Supply voltage is 115-230 V. The cabinet measures 360 x 340 x 440 mm (W x H x D) and weighs 30 kg, or 33 kg as shipped.

Engineering and use context

Its driver has a carbon fibre cone and a dual-spider suspension. A four-layer 76 mm voice coil sits in a triple ferrite magnet system, and the basket has three ventilation channels. According to Velodyne, the dual-spider suspension and vented basket keep control of the cone at high levels.

Its enclosure is a closed, reinforced HDF construction with no port. A black fabric grille on an MDF frame covers the driver.

Setup is done through a free app, which controls volume, crossover frequency, phase and the 6-band EQ from the listening position. The app also has a subsonic filter, a high-pass filter and stored presets. Auto power-on has adjustable sensitivity, and the power switch offers Auto, Trigger and On modes.

Pairing

The XLR and RCA LFE inputs connect to the subwoofer output of an AV receiver or processor. A stereo preamplifier connects to the stereo inputs, and an amplifier without a line-level output connects through the high-level input. The RCA and XLR outputs pass the stereo and LFE signals on to further equipment.

Alternatives

The SPL-X 12 is the next size up in Velodyne's sealed SPL-X series, with a 305 mm driver, a 102 mm voice coil and 1200 W RMS.

Specifications

  • Model name

    SPL-X 10

  • Frequency Response low +/- 3dB (Hz)

    28

  • Frequency Response high +/- 3dB (Hz)

    250

  • Sensitivity (dB at 1 W/1m)

    N/A

  • Impedance (Ohms)

    N/A

  • Has internal amplification

    Yes

  • Power amplifier (W)

    1000 (RMS); 1500 (Peak)

  • Size (sm)

    360 x 340 x 440

  • Weight (kg)

    30

  • Official link