Hifiverse

Subwoofers — Paradigm Electronics Signature SUB 2

Description, images, technical data and specifications

Paradigm Electronics Signature SUB 2
Image source - (c) Paradigm Electronics

The Signature SUB 2 is a sealed powered subwoofer from Paradigm of Canada with six drivers in a hexagonal cabinet. It was introduced in 2009 as the Reference Signature SUB 2, together with the smaller SUB 1, and Paradigm designs, engineers and manufactures it in North America. Paradigm's brief was a subwoofer that plays lower and louder in a size that does not dominate an average living room. The US price starts at USD 10,999.99.

Key specs that matter

Six 254 mm drivers have RCR mineral-filled co-polymer polypropylene cones, FEA-optimised overmolded foam surrounds, 76 mm ten-layer long-excursion voice coils on high-temperature composite Nomex formers, dual spiders and hard ferrite magnet structures. The Ultra-Class-D amplifier is rated at 4,500 W RMS sustained and 9,000 W dynamic peak on a 240 V line and at 3,000 W on 120 V. Frequency response is 9 - 260 Hz (±3 dB) on axis, with low-frequency extension to 7 Hz (DIN 45 500). Paradigm quotes 112 dB at 10 Hz and 126 dB at 60 Hz in room. Cut-off is variable from 35 to 150 Hz with a bypass option, and phase from 0° to 180°. Input sensitivity is 100 mV, and input impedance is 10 kilohms on RCA and 20 kilohms on XLR. With grilles and feet the cabinet measures 62.2 x 60.3 x 56.8 cm (H x W x D), and it weighs 106 kg.

Engineering and use context

Paradigm calls the layout Vibration-Canceling Design Architecture. Two identical drivers are radially aligned on each of three sides, so their reaction forces are equal and opposite and cancel each other, and the cabinet has no significant internal bracing. By Paradigm's figures, six 10-inch drivers move more air than a pair of 15-inch woofers. A 30% mineral content stiffens each cone. Every driver has an FEA-optimised pole piece, an extruded aluminium centre heatsink for convection and forced-air cooling, and a die-cast aluminium chassis with AVS Airflow Ventilation System ribs.

There is no power transformer, as the output stage is Direct-Connected to the power line. Inputs are opto-coupled, and short-circuit protection reacts within 10 µs. Power Factor Correction keeps the line current sinusoidal and continuous and draws up to 95% of the available power. Universal Input Power accepts 108 - 265 V, and on a 15 A, 120 V circuit the DSP lowers output after several seconds so the breaker does not trip. Further features are auto and trigger on/off, soft clipping, short-circuit and thermal protection. Finishes are Piano Black and Black Ash, while Cherry is discontinued.

Pairing

A preamplifier or processor with an RCA or balanced XLR sub-out/LFE output is required. Full continuous power requires a dedicated 208 - 240 V circuit.

Alternatives

The Signature SUB 1 uses the same hexagonal six-driver layout with 203 mm drivers and 1,700 W RMS.

Specifications

  • Model name

    Signature SUB 2

  • Frequency Response low +/- 3dB (Hz)

    9

  • Frequency Response high +/- 3dB (Hz)

    260

  • Sensitivity (dB at 1 W/1m)

    N/A

  • Impedance (Ohms)

    RCA: 10000; XLR: 20000

  • Has internal amplification

    N/A

  • Power amplifier (W)

    N/A

  • Size (sm)

    62.2 × 60.3 × 56.8

  • Weight (kg)

    113

  • Official link