Hifiverse

Subwoofers - Q-Acoustics Q SUB120

Description, images, technical data and specifications

Q-Acoustics Q SUB120
Image source - (c) Q-Acoustics

The Q SUB120 is the 12-inch model of the Q SUB series from Q Acoustics, which also includes the 8-inch Q SUB80 and the 10-inch Q SUB100. All three subwoofers were introduced in 2025, and the British company states that the Q SUB120 is more powerful than the earlier QB 12. Its UK price is GBP 799 in Satin Black or Satin White.

Key specs that matter

Enclosure type is infinite baffle (sealed box) with an effective volume of 44.1 litres. The bass unit is 305 mm (12 in) with a 50 mm voice coil. Amplifier power is 300 W continuous and 600 W peak, with THD of 0.09% at rated power. Frequency response is 28 Hz - 250 Hz (-6 dB), the low-pass crossover range is 40 Hz - 250 Hz and maximum SPL is 114 dB at 1 m. Input sensitivity at maximum gain is 300 mV rms, maximum input level is 2.1 V rms, input impedance is 20 kohms and the noise floor is 50 µV (A-weighted). Dimensions are 400 x 400 x 432 mm (H x W x D) and weight is 22.5 kg. Four spikes with locking nuts and spike covers come in the box.

Engineering and use context

Q Acoustics designed its own amplifier module, which includes the DSP, the power amplifier and the power supply. Four digital power amplifier stages work in a parallel bridge-tied load (PBTL) configuration, and according to the company this reduces output impedance and heat dissipation for better efficiency and speaker control.

Its driver has a heavy-duty steel chassis, a paper cone and a rubber surround, and an aluminium demodulation ring reduces inductance-induced modulation distortion. With no port, the sealed box is tuned acoustically by the DSP.

Cabinet walls are 18 mm high-density MDF, and the front baffle is double thickness at 36 mm. Internal dart bracing reduces cabinet ballooning under the high internal pressure of a sealed enclosure.

Through the DSP the Q SUB120 offers fine delay adjustment and a phase inversion switch. A source detection algorithm identifies whether the input signal is stereo or mono and at what level, then sets system gain automatically.

Pairing

A line-level signal is required, from a stereo preamplifier output, a home cinema subwoofer output or active speakers. Both stereo and mono input signals are accepted. It can be used in 7.2, 5.1 or 2.1 systems.

Alternatives

The Q Acoustics Q SUB100 is the 254 mm (10-inch) model of the same series, with a 38 mm voice coil.

Specifications