Hifiverse

Subwoofers - McIntosh PS1K

Description, images, technical data and specifications

McIntosh PS1K
Image source - (c) McIntosh

The PS1K is a powered subwoofer from McIntosh Laboratory for two-channel stereo and multi-channel home theatre systems. Launched in October 2024 at USD 35,000, it followed the larger PS2K of September 2023. In finish it matches the McIntosh XRT2.1K and XRT1.1K loudspeakers.

Key specs that matter

Amplification is 1 kW in total, two 500 W Class D amplifiers with one per woofer. Nominal impedance is 8 ohms, and maximum output is more than 113 dB. Frequency response is 20 Hz - 500 Hz with LFE and 20 Hz - 100 Hz without LFE. High pass and low pass filters are adjustable over 40 - 100 Hz, phase is continuously variable, and the two-band parametric EQ covers 30 - 100 Hz with variable bandwidth and ±8 dB level. Input sensitivity is 1 V balanced and 0.5 V unbalanced, with 20 kohms and 10 kohms input impedance. THD is 0.05% for the amplifier and 0.005% at the rear panel preamplifier outputs, and signal-to-noise ratio is 115 dB and 100 dB (A-weighted). Connections are a balanced stereo pair in and out, plus mono subwoofer inputs and outputs in balanced and unbalanced form. Dimensions are 489 x 1287 x 572 mm (W x H x D), and weight is 167.8 kg.

Engineering and use context

Both woofers use the proprietary McIntosh Low Distortion High Performance (LD/HP) magnetic circuit design, which McIntosh states lowers distortion and raises power handling and efficiency. Finite Element Analysis was used to optimise the drivers, which have an extra-long voice coil and a suspension designed for extended linear travel. Their cones are multi-layer carbon fibre with an integrated voice coil joint, and McIntosh specifies that the multi-layer construction resists flexing during long excursions.

Above the amplifier module, which carries a power output meter showing total output, sit the two woofers. The sealed enclosure has no port noise, and its baffle is nearly 38 mm thick. Power Guard monitors the input signal and adjusts it to prevent clipping, and Sentry Monitor is fuse-less short-circuit protection that disconnects the amplifier output stage before current becomes unsafe. Power Control and signal sensing switch the subwoofer on and off. The cabinet is high gloss piano black with carbon trim on an anodised aluminium base, and glide feet for hard floors and spikes for carpet are included.

Pairing

A preamplifier, integrated amplifier or home theatre processor with a balanced or unbalanced subwoofer output is required. The balanced stereo inputs and outputs allow connection between a preamplifier and the main power amplifier. Further PS1K units can be daisy-chained from the subwoofer outputs.

Alternatives

The McIntosh PS2K is the larger powered subwoofer, with four 330 mm woofers and a 2,000 W power rating.

Specifications

  • Model name

    PS1K

  • Frequency Response low +/- 3dB (Hz)

    20

  • Frequency Response high +/- 3dB (Hz)

    500 with LFE

  • Sensitivity (dB at 1 W/1m)

    N/A

  • Impedance (Ohms)

    8

  • Has internal amplification

    Yes

  • Power amplifier (W)

    1000

  • Size (sm)

    48.9 x 128.7 x 57.2

  • Weight (kg)

    167.8

  • Official link

More components