Hifiverse

Subwoofers — Bryston Model T Sub

Description, images, technical data and specifications

Bryston Model T Sub
Image source - (c) Bryston

The Model T Sub is the larger of the two Model T series subwoofers from Bryston of Peterborough, Ontario. Bryston builds it like its floorstanding loudspeakers, with the bass drivers stacked in a vertical array, and it shares the 267 x 424 mm footprint of the Mini T Sub while standing 375 mm taller to hold a third driver. Four T-Series subwoofers are offered in all, and each has a built-in 600 W amplifier.

Key specs that matter

Driver complement is three 203 mm aluminium-cone bass drivers. Built-in amplifier power is 600 W RMS in class D. Frequency response is 18 Hz - 150 Hz (±3 dB), and the quick setup guide quotes the same range within ±1.5 dB anechoic. Maximum SPL is 108 dB at 1 m, anechoic. Crossover settings are 40, 60, 80, 100 and 150 Hz, and phase is 0 or 180 degrees, with a separate volume control. Inputs are RCA, XLR and high-level 5-way binding posts, and outputs are RCA and XLR. Each unit measures 985 x 267 x 424 mm (H x W x D) and weighs 48 kg unpacked. Walnut, Boston Cherry and Black Ash are the standard finishes, and others are available on request.

Engineering and use context

According to Bryston, each woofer in the vertical array sees different boundary conditions, and this smooths floor bounce without equalisation. The drivers look like those of the full-range Bryston speakers and have custom suspensions for very long throw. Their custom voice coils are specified to take high power over long periods without compression, distortion or thermal breakdown.

Its class D amplifier runs from a classic linear power supply, and Bryston states that this keeps high-frequency switching noise out of the signal path. A subsonic switch inserts a 20 Hz cut-off filter, and the guide advises switching it on for vinyl playback to reject turntable rumble and record warps. With a 12 V trigger connected over a 3.5 mm cable, the LED turns from green to red and the amplifier drops into a low-power standby mode, and a trigger output passes the signal to a second subwoofer. A removable chassis ground screw is provided against 50 or 60 Hz ground loop hum. Each unit ships set to 115 V or 230 V, and a technician can convert it with a fuse change (T6.3AL for 115 V, T3.15AL for 230 V). Large non-marring feet come pre-assembled, and spike feet and black fabric grilles are included.

Pairing

A receiver, processor or preamplifier with an RCA or XLR subwoofer output is required, or the speaker outputs of an amplifier for the binding posts. The line outputs allow daisy-chaining of further subwoofers with the same cable type. Its series partners are the Bryston Model T loudspeakers.

Alternatives

The Bryston Mini T Sub is the shorter model of the pair, with two 203 mm aluminium-cone drivers, a height of 610 mm and a response of 25 Hz - 150 Hz (±3 dB).

Specifications

More components