Hifiverse

Subwoofers — Wilson Benesch IGx

Description, images, technical data and specifications

Wilson Benesch IGx
Image source - (c) Wilson Benesch

The IGx, short for Infrasonic Generator, is the active subwoofer of Wilson Benesch, the loudspeaker and turntable maker from Sheffield,. It follows the Torus Infrasonic Generator, launched in 2006, which placed a 16 kg steel core at the centre of the design and removed all structural duties from the cabinet. Every Wilson Benesch is hand built.

Key specs that matter

Its 457 mm diaphragm is carbon fibre and polyethylene terephthalate (CF-PET). A large steel core houses two voice coils and two NdFeB high power magnets in push-pull formation. Output power is 100 W continuous and 500 W maximum into 4 ohms. Frequency response is 12 - 90 Hz (-3 dB) at the maximum filter setting and 12 - 30 Hz (-3 dB) at the minimum. A 4th order passive filter is used, interface gain runs from -30 dB to +45 dB, and THD is below 0.04% at 1 W. Phase shift comes from a balanced passive all-pass filter with 0 - 180 degrees of adjustment. Inputs are left and right RCA (500 mV, 10 kohms), left and right XLR (250 mV and 10 kohms per phase) and a left and right high-level Speakon (5 V, 180 kohms). Height is 432 mm including spikes, diameter 510 mm and depth 368 mm. Weight is 54 kg, and the magnetic grille adds 3 kg. Power consumption is 10 - 15 W idle and 650 W maximum.

Engineering and use context

According to Wilson Benesch the IGx diaphragm weighs less than 100 g and can support 1000 times its own mass. It is made from a single piece of fabric, woven in Europe, not from a patchwork. Two 82 mm voice coils and two magnets are deployed in front of and behind the diaphragm, one coil and one magnet directly above it and the second pair on its underside. The steel core sits in the centre of the IGx in the vertical axis.

In the horizontal axis a large 10 mm diameter steel ring is placed across the centre of the cabinet. Vertical 12 mm steel bars tie the top ring to the bottom ring and are put under tension. Control boards were developed in partnership with CASS Audio. A panel-mounted toggle switch selects direct or variable phase. Mains versions are 230 V (50/60 Hz) for the UK and 110 V (50/60 Hz) for the USA. Bespoke finishes include natural wood veneers, P1 coloured carbon and automotive pearl and metallic paints.

Pairing

A speaker-level signal from the power amplifier connects to the high-level Speakon input. Unbalanced or balanced preamplifier outputs connect to the RCA or XLR inputs.

Alternatives

Wilson Benesch has no other subwoofer in its current range.

Specifications