Hifiverse

Subwoofers - YG Acoustics DESCENT

Description, images, technical data and specifications

YG Acoustics DESCENT
Image source - (c) YG Acoustics

Descent is the powered subwoofer of the Peaks series from YG Acoustics. The series also has five loudspeaker models - the Cairn and Tor stand-mounts and the Talus, Ascent and Summit floorstanding speakers. YG describes it as an active, DSP-powered subwoofer with a sealed cabinet and an entirely new driver. The US list price is USD 7,800 per unit.

Key specs that matter

Type is an active subwoofer with DSP filter. Low frequencies come from a 28 cm YG aluminium cone bass driver with a 75 mm voice coil, a titanium former and an advanced magnet structure. A 1000 W full range amplifier powers it, rated at 0.0018% THD+N at 500 W and 124 dB SNR. Frequency response is 18 Hz - 150 Hz. Inputs are a balanced XLR input with XLR through output, RCA inputs left and right, and left and right high-level inputs. Input impedance is 2.2 Mohm (XLR) and 54 kohm (RCA). Dimensions are 44.5 x 40 x 47.5 cm (H x W x D), and weight is 50 kg.

Engineering and use context

Its driver is mounted in a thick aluminium front baffle, precision machined in-house to a profile guided by computational modelling. Sealed cabinet bodies are made of 25 mm dense resin fibre, curved to exact tolerances in custom presses by European workshops. Inside are bracing and acoustic absorbers against cabinet resonances and reflections.

DSP filters are based on computational modelling, measurements and listening tests. Presets store frequency and phase curves for stand-mount, small floorstanding and large floorstanding speakers, plus an AV setting. These filters match the phase curve and roll-off of the Peaks stand-mount and floorstanding models.

High-level inputs use a Phoenix Contact MSTB 2,5/4-ST-5,08 connector and accept up to 50 Vrms. YG states that the driver, cabinet and amplifier, as well as the veneer, lacquer and internal cabling, were selected and modelled for the design. Three wood finishes are listed - Ebony, Rosewood and Oak.

Pairing

The matching main speakers are the Peaks stand-mount and floorstanding models. A preamplifier with a balanced or unbalanced subwoofer output connects to the line inputs. Amplifiers without a line-level subwoofer output connect at speaker level through the high-level inputs.

Alternatives

The Basis is the larger YG subwoofer, from the Reference range, with a 32 cm driver and an amplifier of up to 6 kW RMS.

Specifications

  • Model name

    DESCENT

  • Frequency Response low +/- 3dB (Hz)

    18

  • Frequency Response high +/- 3dB (Hz)

    150

  • Sensitivity (dB at 1 W/1m)

    N/A

  • Impedance (Ohms)

    N/A

  • Has internal amplification

    Yes

  • Power amplifier (W)

    1000

  • Size (sm)

    44.5 x 40.0 x 47.5

  • Weight (kg)

    50

  • Official link

More components