Hifiverse

Subwoofers — Perlisten D15S

Description, images, technical data and specifications

Perlisten D15S
Image source - (c) Perlisten

The D15s is a sealed powered subwoofer with a single 380 mm driver in the D-Series of Perlisten Audio, a company founded by Dan Roemer, Lars Johansen and Erik Wiederholtz. Other D-Series models are the D12s and the dual-driver D212s and D215s. It is certified THX Dominus, and Perlisten describes it as the smallest single subwoofer with that certification. The US list price is USD 6,595.

Key specs that matter

Alignment is acoustic suspension. The driver is 380 mm with a carbon fiber diaphragm and ±30 mm linear excursion. Amplifier power is 2.0 kW RMS short term. Frequency response with the THX EQ is 20 - 320 Hz (-6 dB) and 16 - 395 Hz (-10 dB). With the Boost (Large Room) EQ it is 16 - 320 Hz (-6 dB) and 14 - 395 Hz (-10 dB), and with the Cut (Small Room) EQ 24 - 320 Hz (-6 dB) and 18 - 395 Hz (-10 dB). Reference sensitivity is 92 dB (150 mV/1.0 m). Dimensions are 528 x 500 x 500 mm (H x W x D) and weight is 46.0 kg. Piano black is the standard finish, and grilles are optional.

Engineering and use context

Perlisten specifies a low Q, shallow rolloff response for this sealed design. Its drivers are developed in-house from the ground up. Key parts of the driver are a carbon fiber composite diaphragm, multiple aluminium shorting rings, large magnets, multi-layer Nomex spiders and lightweight aluminium voice coil wire. Perlisten simulates these components with proprietary nonlinear modeling, optimizes the driver both in free air and in the box, and refines it with Klippel laser measurements.

All functions and safeties are controlled by a Texas Instruments DSP with 48-bit data paths and a 32-bit ARM Cortex M4 processor with double precision floating point math. According to Perlisten, this control system reacts within microseconds. Settings are made on the 61 mm LCD colour touchscreen or in the Perlisten app for iOS and Android. A 10-band parametric EQ with three user presets is available.

On the connection panel are two balanced XLR inputs and two unbalanced RCA inputs, each with an unbuffered output of the same type. Auto turn-on and the 12 V trigger can be configured for XLR 1, XLR 1+2, RCA 1 or RCA 1+2.

Pairing

The low pass filter can be bypassed for an AV processor with its own bass management, or set from 30 to 160 Hz with slopes of 6, 12, 18 or 24 dB per octave. Phase is variable from 0 to 270 degrees, and polarity is normal or inverted. The unbuffered outputs allow a second subwoofer to be connected.

Alternatives

The D12s is the smaller single-driver model of the D-Series, with a 300 mm carbon fiber driver, a 1.5 kW RMS short-term amplifier and 41.0 kg weight.

Specifications

  • Model name

    D15S

  • Frequency Response low +/- 3dB (Hz)

    20

  • Frequency Response high +/- 3dB (Hz)

    320

  • Sensitivity (dB at 1 W/1m)

    N/A

  • Impedance (Ohms)

    N/A

  • Has internal amplification

    Yes

  • Power amplifier (W)

    2000 (short term)

  • Size (sm)

    52.8 x 50.0 x 50.0

  • Weight (kg)

    46

  • Official link