Hifiverse

Subwoofers — Revel B140

Description, images, technical data and specifications

Revel B140
Image source - (c) Revel

The B140 is the powered subwoofer of Revel's Performa4 series, the Harman brand's line introduced at AXPONA 2026 with deliveries from April 2026. Revel presents it as the companion to the Performa4 floorstanding and bookshelf loudspeakers, among them the F346 and F345 towers and the M146 and M145 standmount models. The suggested price at launch was USD 2,999 each.

Key specs that matter

Amplification is a Class D amplifier rated at 750 W RMS and 1500 W peak. Frequency response is 26 Hz - 150 Hz (±6 dB). The variable low-pass crossover covers 50 Hz - 150 Hz at 24 dB/octave. Its low-frequency driver is a 250 mm coated fibre-composite cone woofer with a 75 mm two-layer copper voice coil and 30 mm peak-to-peak excursion. Dimensions are 376 x 429 x 436 mm (H x W x D), and weight is 27.8 kg net or 35.2 kg shipped. Power requirements are 120 V, 60 Hz (US) or 220 - 230 V, 50/60 Hz (EU), with consumption below 0.5 W in standby and 205 W at maximum.

Engineering and use context

The woofer sits in a precision cast aluminium frame optimised with finite-element analysis. Its pole piece extends 10 mm above the top plate, so that the magnetic field stays stable over the full excursion, and the extension also aids thermal dissipation from the voice coil. Bass loading is reflex through a rear-mounted port of Revel's patented Constant Pressure Gradient type, with a uniform pressure change along the entire port length to minimise turbulence.

Each cabinet is rigid and cross-braced, with gently curved sides in natural walnut or black walnut veneer and a polished black accent. Grilles attach magnetically, with no visible fasteners, hidden hardware and integrated trim rings. Solid aluminium feet carry the enclosure, and four floor spikes with four spike protectors, the grille and a power cord come in the box. On the rear panel are a variable low-pass filter, variable phase control, volume control and an auto on/off circuit that powers the B140 on when a signal is detected and off when idle.

Pairing

Inputs are an RCA socket for LFE or line-level signals and a 3.5 mm 12 V trigger input. The LFE input bypasses the internal low-pass filter. A receiver or power amplifier with a 12 V trigger output can be connected to the trigger input.

Alternatives

The Revel B10 is a 254 mm subwoofer from the earlier Concerta2 series, with an 800 W RMS Class D amplifier.

Specifications

  • Model name

    B140

  • Frequency Response low +/- 3dB (Hz)

    26

  • Frequency Response high +/- 3dB (Hz)

    N/A

  • Sensitivity (dB at 1 W/1m)

    N/A

  • Impedance (Ohms)

    N/A

  • Has internal amplification

    Yes

  • Power amplifier (W)

    750 (RMS); 1500 (Peak)

  • Size (sm)

    N/A

  • Weight (kg)

    N/A

  • Official link

Related content

More components