Hifiverse

Subwoofers - Emotiva Airmotiv XS8

Description, images, technical data and specifications

Emotiva Airmotiv XS8
Image source - (c) Emotiva

The Airmotiv XS8 is the smallest member of Emotiva's Airmotiv XS subwoofer family, which comprises the XS8, XS10, XS12 and XS15. Emotiva introduced the range in 2022 alongside the Airmotiv T3+ and C3+ loudspeakers, and the XS8 was announced at USD 399. Emotiva describes it as a choice for installations with limited space and for dual-subwoofer setups.

Key specs that matter

Its driver is a 203 mm heavy duty long throw subwoofer with a cast aluminium frame and a 38 mm copper voice coil. The Class A/B amplifier is rated at 250 W RMS. Frequency response is 29 Hz - 200 Hz (±3 dB). Cabinet tuning is a rear tuned slot port. Inputs are one balanced XLR and two summed RCA unbalanced inputs, labelled Sum and LFE. Controls are Crossover, Phase, Volume and LF Boost. AC power is 115 V/60 Hz or 230 V/50 Hz. Dimensions are 375 x 298 x 381 mm (H x W x D, feet included), and boxed weight is 20.9 kg.

Engineering and use context

All four XS models offer identical controls and features, and the XS8 uses the same driver construction as the larger ones. A non-pressed treated paper cone reinforced with aramid fibres is held by an SBR rubber surround. Behind it, the motor assembly combines a double stacked ferrite magnet with a solid copper voice coil on an aluminium former. Cooling comes from forced air, a vented pole piece and vents under the spider.

An oversized toroidal power transformer powers the Class A/B amplifier, and an advanced multi-stage low-distortion limiter protects the subwoofer against overdrive. Each XS model has a built-in 12 dB/octave low pass crossover adjustable up to 150 Hz. LF Boost covers approximately -3 dB to +9 dB at 30 Hz, and the response is flattest at the 0 dB position. Heat sinks sit in the centre of the rear amplifier plate.

In Auto power mode, the subwoofer switches on when incoming audio is detected and goes to Standby after several minutes without signal. Green and red status indications show On and Standby. Several coats of satin black lacquer cover the faceted front bezel of the heavily braced HDF cabinet, and textured vinyl covers the sides and rear. A sculpted fabric grille is removable, and the anti-slip rubber feet are permanently attached. An IEC power receptacle, a line voltage selector and a drawer-type fuse holder are on the rear panel. Warranty is five years.

Pairing

A line-level subwoofer or LFE output, balanced or unbalanced, is required. The XLR input accepts a single balanced subwoofer or LFE output. Speaker-level inputs are not provided.

Alternatives

The Airmotiv XS10 is the next size up, with a 254 mm driver, 350 W RMS and a response from 26 Hz.

Specifications

  • Model name

    Airmotiv XS8

  • Frequency Response low +/- 3dB (Hz)

    29

  • Frequency Response high +/- 3dB (Hz)

    200

  • Sensitivity (dB at 1 W/1m)

    N/A

  • Impedance (Ohms)

    N/A

  • Has internal amplification

    Yes

  • Power amplifier (W)

    250

  • Size (sm)

    37,5 x 29,8 x 38,1

  • Weight (kg)

    20,9

  • Official link