Hifiverse

Floorstanding loudspeakers - Popori Acoustics WR2

Description, images, technical data and specifications

Popori Acoustics WR2
Image source - (c) Popori Acoustics

The WR2 is a wide-range electrostatic floorstanding loudspeaker from Popori Acoustics of Baja, Hungary. Designer Otto Popori spent years repairing electrostatic panels from other makers before building his own. Popori conceived it to sit between the two existing Popori designs, and its first public show appearance came in Warsaw in November 2022. In the US it was shown in 2025 at USD 38,000 per pair. Today the model is listed as the WR2 Arrabona under the Prodigio Audio name.

Key specs that matter

Design is two-way, with one large electrostatic panel and a ribbon planar transducer for the top octaves. Frequency response is 30 Hz - 22 kHz, and sensitivity is 91 dB. Minimum impedance is 3.0 ohms, and THD is below 0.2%. Maximum level is 105 dB. The foil is 0.005 mm thick and has an area of 0.45 m2. Each speaker measures 1848 x 415 x 330 mm (H x W x D) and weighs 37 kg, and the shipping crate weighs 94 kg. An earlier 2023 version was 1660 mm tall, with a 0.4 m2 foil, 90 dB sensitivity and a weight of 35 kg, and the taller WR2 XL followed in June 2023.

Engineering and use context

No dynamic drivers are used, so the main panel covers the bass and midrange on its own. Side wings next to the rectangular panel add radiating area and also damp the panel. Popori tensions the foil in both directions with its own string technique, so that the whole surface, corners included, moves. As a dipole the panel radiates equally to the front and to the rear.

Between the steel legs sits a sealed black box with the electronics and transformers that generate the polarising voltage from a 12 V DC supply. Each speaker has its own short-circuit protected adaptor. There is no power switch, and a full charge of the foil takes 60 to 90 minutes. A self-resetting overload protection circuit has an indicator LED. Corian cladding covers the steel frame. Operating limits are +10 to +55 C and 5 to 65% humidity, and the warranty is five years once the warranty card is returned.

Pairing

Popori recommends 50 to 70 W per channel and gives 250 W as the maximum, with a nominal rating of 4 ohms in company statements. Two terminal pairs, marked HIGH and LOW-MID, allow bi-wiring or bi-amping, with one amplifier on the ribbon and one on the panel, once the jumper plates are removed.

Alternatives

The Popori WR1 W is the larger two-way electrostatic model, with a 0.6 m2 foil, a 26 Hz lower limit and a weight of 68 kg.

Specifications

  • Model name

    WR2

  • Frequency Response low +/- 3dB (Hz)

    30

  • Frequency Response high +/- 3dB (Hz)

    22 000

  • Sensitivity (dB at 1 W/1m)

    90

  • Impedance (Ohms)

    N/A

  • Power amplifier requirements (W)

    N/A

  • Has internal amplification

    N/A

  • Internal amplification power (W)

    N/A

  • Size (sm)

    166.0 x 41.5 x 33.0

  • Weight (kg)

    N/A

  • Official link

More components