Hifiverse

Floorstanding loudspeakers - Von Schweikert Audio ULTRA.eleven

Description, images, technical data and specifications

Von Schweikert Audio ULTRA.eleven
Image source - (c) Von Schweikert Audio

The ULTRA.eleven, written ULTRA.11 by Von Schweikert Audio, is the flagship floorstanding loudspeaker of the Californian company's ULTRA series. Every pair is hand-assembled and built to order. Each speaker carries eleven individual drivers, including two rear-mounted Shockwave subwoofers with their own amplification.

Key specs that matter

Frequency response is 16 Hz - 40 kHz. Sensitivity is 94 dB (1 W/1 m), and nominal impedance is 4 ohms. Recommended minimum amplifier power is 100 W. Dimensions are 2134 x 533 x 762 mm (H x W at the rear x D), weight is 340 kg, and the shipping crate measures 2388 x 737 x 1092 mm. The optional Foundation Hybrid Bass Amplifier is rated at 1200 W RMS.

Engineering and use context

Von Schweikert offers the ULTRA.11 fully passive or with the Foundation Hybrid Bass System as an upgrade. In that system the full range of the signal passes through the analog crossover network, and the system operates in a completely analog mode without digital signal processing. According to Von Schweikert, the dual Shockwave subwoofers are powered by two 1000-watt amplifiers.

Midrange and bass drivers come from Accuton of Germany and use Al2O3 ceramic cones, with the exception of the sub-bass units. High frequencies are covered by Danish beryllium tweeters, and a front ribbon super tweeter is used only in the ULTRA series. On the back panel sits a ribbon-based Ambient Information Retrieval array, an adjustable ambience retrieval system radiating from the rear of the speaker.

The cabinet uses the company's triple-wall laminate, developed in 1994 by Albert Von Schweikert with lab partners from Cal Tech. Its outer layer is resin-based HDF, the middle layer is synthetic stone, and the inner layer is a dense woven damping material, about 75 mm thick in total. Internal bracing gives different areas of the cabinet different stiffness. Painted finishes are multi-coat and applied by hand, and the cabinets are built in California.

Pairing

An amplifier stable into 4 ohms with at least 100 W per channel is required. With the Foundation Hybrid Bass System the main amplifier drives the full-range signal through the passive crossover.

Alternatives

The ULTRA.9 is the next floorstanding model down in the ULTRA series, with an integrated rear-mounted Shockwave subwoofer and a 92 dB sensitivity.

Specifications

  • Model name

    ULTRA.eleven

  • Frequency Response low +/- 3dB (Hz)

    16

  • Frequency Response high +/- 3dB (Hz)

    40 000

  • Sensitivity (dB at 1 W/1m)

    94

  • Impedance (Ohms)

    4

  • Power amplifier requirements (W)

    100

  • Has internal amplification

    N/A

  • Internal amplification power (W)

    N/A

  • Size (sm)

    213.3 × 53.3 × 76.2

  • Weight (kg)

    N/A

  • Official link