The Tonale Pro is a fully active floorstanding loudspeaker from BETONart Audio of Leimen, Germany. Its enclosure is made of carbon concrete and built as three monolithic modules, and BETONart now offers only fully active loudspeakers. Building one pair takes around 180 working hours with a large share of hand work. Price is from EUR 36,000 per speaker.
Key specs that matter
Each speaker has two modified 15-inch high-power bass drivers in closed enclosures, two ACCUTON Cell ceramic midrange drivers with neodymium magnets and a nanocrystalline aluminium ribbon tweeter. Amplification is five separate class D channels, 2 x 1,000 W for the bass drivers and 3 x 200 W for midrange and tweeter, a total of 2,600 W per speaker. Frequency response is 25 Hz - 24 kHz. BETONart quotes 97 dB efficiency and ±11 mm linear excursion in the bass section. Inputs are XLR, RCA and WiSA wireless at 24-bit/96 kHz. Each speaker measures 180 x 42 x 50 cm (H x W x D) and weighs 280 kg.
Engineering and use context
A midrange and tweeter module sits between two separate bass modules, and the three monolithic carbon concrete enclosures are acoustically decoupled from each other. The ribbon tweeter is mounted in a waveguide cast from carbon concrete. Every driver is driven directly by its own class D amplifier channel.
D/A conversion uses a four-channel ESS SABRE DAC, specified at 122 dB(A) signal-to-noise ratio and -108 dB THD+N. An internal DSP provides the IIR filters and delay correction.
Two operating modes are available. In TRUE STUDIO mode the speaker runs as a 3.5-way system, with one ACCUTON midrange driver covering the full midrange and the second supporting the lower mids. PURE LIVE mode runs both midrange drivers in parallel in a D'Appolito arrangement, with a larger effective diaphragm area.
The mode is selected in Audio Smart Control, a browser-based control system for tablet, smartphone or computer. It also covers sound presets, individual EQ, group control, tweeter adjustment and the illuminated TONALE PRO lettering.
Pairing
A line-level source or preamplifier with XLR or RCA outputs is required. A WiSA transmitter allows a wireless connection. No external power amplifier is needed.
Alternatives
No other floorstanding loudspeaker is listed in the current BETONart Audio range.