Hifiverse

Floorstanding loudspeakers - Charney Audio The Lumaca VIII

Description, images, technical data and specifications

Charney Audio The Lumaca VIII
Image source - (c) Charney Audio

The Lumaca VIII is the largest of the three Lumaca horn loudspeakers from Charney Audio, the American single-driver specialist founded by Brian Charney, whose speakers are made in the USA. Charney calls the Lumaca the statement realisation of its tractrix horn architecture, and the series grew out of the earlier Concerto.

Key specs that matter

Frequency response is 18 Hz - 22 kHz. Sensitivity is 107 dB, and nominal impedance is 8 ohms. The tractrix expansion is 3683 mm long. Each speaker measures 2388 x 762 x 762 mm (H x W x D) and weighs 38.6 kg. A pair is priced at USD 90,000 with Voxativ AC-2.6 drivers and USD 95,000 with AER bd-3b drivers.

Engineering and use context

In the VIII, the exit path of the horn is directed rearward at a 45 degree angle, whereas in the VI and VII the bass exits through the base over 360 degrees. Charney states that the final expansion of the horn engages the boundary behind the speaker as part of its acoustic loading.

Throughout the structure the tractrix expansion is held to within thousandths of an inch. Its surface is continuous, with no corners or flat interruptions along the path of the wavefront, and Charney says the enclosure remains mechanically quiet under load.

A single 203 mm wideband driver covers the full range without a crossover. Voxativ and AER drivers are both fully supported, and driver choice does not alter the behaviour of the horn. The AER bd-3 is the more costly option at USD 11,500 on its own. Its response is 20 Hz - 80 kHz, impedance is 16 ohms, and power handling is 100 W nominal or 300 W peak. Outer diameter is 220 mm, mounting depth is 65 mm, and weight is 4.5 kg, against 2.4 kg for the Voxativ AC-2.6. Charney lists efficiency for the bd-1 to bd-3 family at 103 - 106 dB (1 W/1 m). Besides the AC-2.6, the Charney driver list includes the Voxativ AC-1.6 and the AC-X, a field coil driver.

Pairing

A low-power amplifier, including a single-ended 300B tube design, is sufficient. The matching amplifier from the same maker is the Charney Kit-1 300B. No subwoofer or external crossover is required.

Alternatives

The Charney Audio Lumaca VII is the smaller model of the series, with a 3200 mm tractrix expansion and a response down to 20 Hz.

Specifications

  • Model name

    The Lumaca VIII

  • Frequency Response low +/- 3dB (Hz)

    18

  • Frequency Response high +/- 3dB (Hz)

    22 000

  • Sensitivity (dB at 1 W/1m)

    N/A

  • Impedance (Ohms)

    N/A

  • Power amplifier requirements (W)

    N/A

  • Has internal amplification

    N/A

  • Internal amplification power (W)

    N/A

  • Size (sm)

    238.7 × 76.2 × 76.2

  • Weight (kg)

    38.56

  • Official link

More components