Hifiverse

Floorstanding loudspeakers — Pro-Ject Speaker Box 12 E Carbon

Description, images, technical data and specifications

Pro-Ject Speaker Box 12 E Carbon
Image source - (c) Pro-Ject

The Speaker Box 12 E Carbon is a 2.5-way floorstanding speaker from Pro-Ject Audio Systems, listed by the company as a reference floorstanding model. It joined the E Carbon loudspeaker family in January 2025 as the larger of two floorstanding models, next to the slimmer Speaker Box 10 E Carbon and above the 3 E and 5 E bookshelf designs. MSRP per pair was EUR 1,199 in satin paint and EUR 1,299 in walnut veneer, both including VAT.

Key specs that matter

Enclosure type is bass reflex with a rear port. Drive units are a 25 mm silk dome tweeter and two 127 mm carbon fibre glass bass/mid drivers. Frequency response is 42 Hz - 20 kHz, sensitivity is 89 dB (1 W/1 m), and nominal impedance is 4 ohms. Recommended amplifier power is 20 - 200 W. Dimensions are 1100 x 165 x 220 mm (H x W x D), and weight is 19 kg each.

Engineering and use context

Pro-Ject specifies a 2.5-way design in which the bottom woofer reproduces only the low frequencies. Both woofers have cones of a fibre glass carbon composite, and the crossover is a discrete design. All drivers are mounted in a stiff, non-resonating MDF cabinet. A separate cabinet filled with sand forms what Pro-Ject calls a gravity mass point, intended for vibration absorption and stability.

On the front baffle there are no visible screws. Black grilles are included and are attached with magnets. According to the manual, these grilles are nearly acoustically transparent and are meant only as protection from outside influences such as pets, and Pro-Ject recommends operating the speakers without them. Four spike feet screw into threaded nuts in the base plate, and spike discs can be placed underneath to protect the floor. At the rear, a double block of gold-plated banana terminals is mounted.

Five satin finishes are offered - Black, White, Fir Green, Golden Yellow and Steel Blue - together with a real wood walnut veneer.

Pairing

An amplifier rated for 4 ohm loads is required. Pro-Ject names the Stereo Box DS3 and MaiA DS3 integrated amplifiers as matching partners. The double terminal block allows bi-wiring or bi-amping, with the woofers and the tweeter on separate amplifiers.

Alternatives

The Speaker Box 10 E Carbon is the slimmer Pro-Ject floorstanding speaker, with two 102 mm bass/mid drivers, a 48 Hz lower limit and a 935 x 140 x 190 mm cabinet.

Specifications

  • Model name

    Speaker Box 12 E Carbon

  • Frequency Response low +/- 3dB (Hz)

    42

  • Frequency Response high +/- 3dB (Hz)

    20000

  • Sensitivity (dB at 1 W/1m)

    89

  • Impedance (Ohms)

    4

  • Power amplifier requirements (W)

    20 - 200

  • Has internal amplification

    N/A

  • Internal amplification power (W)

    N/A

  • Size (sm)

    110 x 16.5 x 220

  • Weight (kg)

    15.17

  • Official link

Related content