Hifiverse

Floorstanding loudspeakers - Sonus Faber SONETTO VIII

Description, images, technical data and specifications

Sonus Faber SONETTO VIII
Image source - (c) Sonus Faber

The Sonetto VIII G2 is a three-way floorstanding loudspeaker and the flagship of the second-generation Sonetto collection from Sonus faber, based in Arcugnano near Vicenza. Sonus faber describes it as the most powerful three-way model of the Sonetto range, hand-crafted in Italy. Its cork chamber and Camelia midrange were first developed for the Suprema system. Franco Serblin founded the company in Vicenza in 1983.

Key specs that matter

This is a 3-way system with a sealed cork enclosure for the midrange and a down-vented box for the woofers. Drive units are one 29 mm (1.1 in) DAD Arrow Point extended frequency tweeter, one 165 mm (6.5 in) Camelia midrange and two 200 mm (8 in) woofers. Crossover points are 350 Hz and 2500 Hz. Frequency response is 33 Hz - 40 kHz, and sensitivity is 90 dB SPL (2.83 V/1 m). Nominal impedance is 4 ohms, with recommended amplifier power of 50 - 400 W. Each speaker measures 1190 x 334 x 480 mm (H x W x D) and weighs 45 kg. A pair ships in two cartons of 1290 x 445 x 585 mm each, with a packed weight of 100.4 kg.

Engineering and use context

Tweeter and midrange are housed together in a cork chamber tailored for internal volume. Both units have a copper shorting ring in the motor, while each woofer uses an aluminium demodulation ring. On the tweeter, Sonus faber applies its Silk Dome DAD (Damped Apex Dome) technology with a copper cup.

Its Camelia midrange has an organic basket and a membrane shaped after the camellia flower. According to Sonus faber, the five cuts around the edge avoid the resonances found in typical circular diaphragms. The membrane is left unpainted.

Across the G2 collection, the crossover follows the Phase Coherent Crossover design, aimed at synchronising the phase rotations of the drivers. The lute-shaped cabinet stands on a concrete base introduced with Sonetto G2 for stability and structural integrity and to minimise vibrations. Wood veneer is laid at 45 degrees, a treatment previously used on Stradivari, Amati and the Homage series. Finishes are Walnut Wood, Wenge Wood and Black, each combined with leather and concrete.

Pairing

An amplifier stable into 4 ohms is required. Integrated amplifiers and separate power amplifiers within the recommended power range both match.

Alternatives

The Sonetto V G2 is the smaller three-way floorstanding model of the collection, with two 165 mm woofers.

Specifications

  • Model name

    SONETTO VIII

  • Frequency Response low +/- 3dB (Hz)

    33

  • Frequency Response high +/- 3dB (Hz)

    40 000

  • Sensitivity (dB at 1 W/1m)

    90

  • Impedance (Ohms)

    4

  • Power amplifier requirements (W)

    50 - 400

  • Has internal amplification

    N/A

  • Internal amplification power (W)

    N/A

  • Size (sm)

    119.0 × 33.4 × 48.0

  • Weight (kg)

    45

  • Official link

More components