Hifiverse

Floorstanding loudspeakers — Tannoy SGM 12

Description, images, technical data and specifications

Tannoy SGM 12
Image source - (c) Tannoy

The SGM 12 is the middle model of Tannoy's Super Gold Monitor series, introduced in late 2023 between the SGM 10 and the flagship SGM 15. Tannoy describes the range as a modern evolution of its classic Super Gold designs, which were used in professional studios during the 1970s and 1980s, and places the SGM 12 in medium-sized rooms. At launch it was listed at GBP 8,249 per pair in the UK and EUR 9,500 per pair in Europe.

Key specs that matter

This passive floorstanding loudspeaker uses a single 300 mm Dual Concentric driver. Its LF section has a paper pulp cone with a twin roll impregnated fabric surround and a 52 mm edge-wound voice coil, and the HF section is a 33 mm aluminium/magnesium alloy dome, also with an edge-wound voice coil. Crossover frequency is 1.2 kHz. Frequency response is 38 Hz - 30 kHz (±6 dB), sensitivity is 91 dB (1 W/1 m) and impedance is 8 ohms. Power handling (IEC) is 125 W continuous and 500 W peak, with a recommended amplifier power of 20 - 250 W. Each cabinet measures 863.3 x 447 x 308 mm (H x W x D) and weighs 29.4 kg net.

Engineering and use context

In place of the Alnico magnet of the 1970s original, the driver now has a modern ferrite magnet with copper demodulation rings and a high flux magnetic circuit. Tannoy specifies a bi-wired, hard-wired passive crossover with a low-loss second-order low-pass and a first-order high-pass filter.

A precision-machined, gold-anodised aluminium panel on the front houses a two-band energy control. Treble Energy is a ±3 dB shelving adjustment over 1 kHz to 30 kHz, while Treble Roll-Off sets a slope between +2 dB and -6 dB per octave over 5 kHz to 30 kHz.

Its enclosure is built from 19 mm particle board and MDF with plywood internal bracing and is heavily damped. The bracing incorporates DMT (Differential Materials Technology) to couple the driver to the cabinet. Both outlets of the twin distributed port are on the front baffle. Five 4 mm Tannoy customised binding posts with multi-layer 24-carat gold plating carry the HF, LF and earth connections. The finish is walnut veneer with a nylon grille cover, and the accessory pack contains bi-wire bridge connectors, Prestige wood wax and adjustable feet.

Pairing

The terminals allow single-wiring with the bridges, bi-wiring or passive bi-amping with one amplifier for the LF and one for the HF section. A separate earth terminal connects to the amplifier ground.

Alternatives

The Tannoy SGM 15 is the largest model of the Super Gold Monitor series, with a 380 mm Dual Concentric driver and a triple distributed port.

Specifications

  • Model name

    SGM 12

  • Frequency Response low +/- 3dB (Hz)

    38

  • Frequency Response high +/- 3dB (Hz)

    30 000

  • Sensitivity (dB at 1 W/1m)

    91

  • Impedance (Ohms)

    8

  • Power amplifier requirements (W)

    20 - 250

  • Has internal amplification

    N/A

  • Internal amplification power (W)

    N/A

  • Size (sm)

    44.7 x 30.8 x 86.3

  • Weight (kg)

    29.4

  • Official link

More components