Hifiverse

Floorstanding loudspeakers — ProAc Response D30R Mahogany

Description, images, technical data and specifications

ProAc Response D30R Mahogany
Image source - (c) ProAc

The Response D30R is a two-way floorstanding loudspeaker from ProAc, the English company founded by designer Stewart Tyler. Its R suffix denotes the ribbon tweeter version of the D30. In the Response range it sits below the D40R and shares its high-frequency unit, cone technology, crossover approach and bass loading in a slimmer cabinet. This entry covers the mahogany finish. Later production moved to the D30RS, which uses a Pagina Mica cone, so the carbon fibre D30R is the original ribbon model of the series.

Key specs that matter

Drive units are a ProAc ribbon tweeter with a 60 x 10 mm diaphragm and a 165 mm (6.5 in) carbon fibre mid/bass cone. Frequency response is 20 Hz - 30 kHz. Sensitivity is 89 dB (1 W/1 m), nominal impedance is 8 ohms, and recommended amplifier power is 10 - 200 W. The cabinet measures 215 x 1041 x 266 mm (W x H x D) on a 257 x 311 mm plinth. Each speaker weighs 27 kg.

Engineering and use context

ProAc's ribbon has a diaphragm lighter than a human hair, with rear chamber damping and an alnico magnet. Its mid/bass unit uses a carbon fibre cone developed by ProAc, with a polymer rear coating and concentric damping. Bass loading follows the D40, with a single mid/bass driver in a tall enclosure.

Crossover components are mounted on a dedicated circuit board, and multistrand oxygen-free copper cable is used throughout. Its input is split for optional bi-wiring or bi-amplification, as on other ProAc Response models. A plinth with spikes is supplied, and the grilles are acoustically transparent crimplene. Mahogany is one of six standard finishes, alongside black ash, cherry, silk white, natural oak and walnut.

Pairing

An amplifier within ProAc's recommended power range is required. The split terminals allow bi-wiring or passive bi-amping.

Alternatives

ProAc's Response D40R is the larger floorstanding loudspeaker of the same range, with two mid/bass drivers and the same ribbon tweeter.

Specifications

  • Model name

    Response D30R Mahogany

  • Frequency Response low +/- 3dB (Hz)

    20

  • Frequency Response high +/- 3dB (Hz)

    30 000

  • Sensitivity (dB at 1 W/1m)

    89

  • Impedance (Ohms)

    8

  • Power amplifier requirements (W)

    10 - 200

  • Has internal amplification

    N/A

  • Internal amplification power (W)

    N/A

  • Size (sm)

    21.5 х 104.1 х 26.6

  • Weight (kg)

    27

  • Official link

More components