Hifiverse

Floorstanding loudspeakers - Canton Reference 7

Description, images, technical data and specifications

Canton Reference 7
Image source - (c) Canton

The Reference 7 is the slimmest floorstanding speaker in Canton's Reference series and the smallest of its five floorstanding models. Like every Reference model it is manufactured in Germany, and passive Reference speakers carry a 10-year warranty. Production began in September 2023. Canton lists it at EUR 3,300 per piece in white, and in North America the pair costs USD 10,000 in the lacquered versions and USD 11,000 in walnut.

Key specs that matter

Principle is 3-way, bass reflex. Two 154 mm BCT woofers, one 154 mm BCT midrange and one 25 mm BC tweeter make up the driver complement. Transmission range is 23 Hz - 40 kHz, and transition frequencies are 190 Hz and 3.2 kHz. Efficiency is 87.5 dB (2.83 V/1 m), impedance is 4 - 8 ohms, and nominal and music load capacity are 160 W and 320 W. Dimensions are 28 x 99 x 43 cm (W x H x D) with the base plate, or 25 cm wide and 40 cm deep without it. Weight is 33 kg.

Engineering and use context

Both woofers have black ceramic tungsten cones and work with the Bass Guide in a tuned cabinet volume. Its bass reflex port is downfire. The midrange uses a TCC cone, and the drivers use Wave-Surround 3.0. On the BC tweeter, the 25 mm dome is black aluminium oxide ceramic. Screwless adapter rings cover the BC and BCT drivers on the round baffle and are designed as asymmetrical wave guides.

Canton states that hand-picked crossover components with minimal tolerance give a balanced impedance curve and correct impulse response of the drivers. Displacement Control in the Reference crossovers prevents uncontrolled deflection of the woofers, and internal wiring is CantoLink 400 cable with a special core and six twisted conductors. Each cabinet is multi-layer laminate with computer-optimised internal stiffening. Damping of special fleece and the absence of parallel cabinet surfaces prevent standing waves. RC (Room Compensation) controls on the terminal adjust midrange and tweeter level in 1.5 dB increments. Height-adjustable unit feet, spike preparation and a magnetic fabric cover are standard. Finishes are White Satin, Black Piano with twelve layers of lacquer, and Walnut veneer refined with a special sanding technique and matte lacquer.

Pairing

An amplifier rated for 4 ohm loads is required. WBT nextgen binding posts allow bi-wiring or bi-amping, and hard gold-plated copper bridges are included for single-wire use.

Alternatives

The Canton Reference 5 is the next larger Reference floorstanding model, with two 174 mm BCT woofers.

Specifications

More components