The Reference 1 is the floorstanding loudspeaker that heads the Reference series from Canton, the German manufacturer based in Weilrod. It is a hand-made three-way design built on BCT (black ceramic tungsten) cone drivers. Canton describes these drivers as the result of years of development. The US price was USD 29,000 per pair, and the finishes are Black piano finish and White satin.
Key specs that matter
Acoustic principle is a 3-way bass reflex system with a downfire resonator. Drive units are one 25 mm tweeter with an alumina ceramic dome, one 174 mm midrange driver with a black ceramic tungsten cone and Wave surround, and three 219 mm woofers with black ceramic tungsten cones. Crossover frequencies are 170 Hz and 3,100 Hz. Transmission range is 18 - 40,000 Hz. Efficiency is 88 dB (2.83 V/1 m) and impedance is 4 - 8 ohms. Nominal load capacity is 450 W and music load capacity is 820 W. Dimensions are 39 x 133 x 63 cm (W x H x D, with base), and weight is 81 kg.
Engineering and use context
Each cabinet is divided into three chambers, one for each driver section. Side panels, rear and top are a curved multi-layer laminate, and the 60 mm baffle is milled from the solid. Baffles, rear panels and side panels meet in an edgeless connection.
Canton redesigned its bass reflex system with Bass Guide for this generation. The port is integrated into the cabinet and combines front and rear venting, and the air is controlled via a channel in the base plate. A base is included, together with height-adjustable feet and preparation for spikes.
Cover rings and the connection terminals are made of POM, with a fine-pored, silk-matt surface covered by a thin layer of lacquer. On the rear panel, WBT terminals with gold-plated contacts accept banana plugs. Level adjustment for the tweeter and a room adjustment setting are provided at the terminal panel. The fabric front cover is held magnetically, and Canton gives a 10-year warranty.
Pairing
An amplifier stable into 4 ohms is required. The WBT terminals allow bi-wiring or passive bi-amping.
Alternatives
The Canton Reference 2 is a smaller floorstanding loudspeaker of the same series with two 219 mm woofers instead of three.