Hifiverse

Floorstanding loudspeakers - Russell K Red 120Se

Description, images, technical data and specifications

Russell K Red 120Se
Image source - (c) Russell K

The Red 120Se is the upgraded version of the Russell K Red 120 floorstanding loudspeaker. It keeps the cabinet of the standard model, and Russell K states that its other specifications are the same as those of the Red 120.

Key specs that matter

Drive units are a 25 mm soft dome tweeter with a metal faceplate and two 5-inch bass units with impregnated paper cones and a curved, optimised acoustic profile. One bass unit works as the bass/mid driver, and the other is a sub-bass driver that rolls off from 80 Hz at 6 dB/octave. The bass/mid crossover is at 1,800 Hz nominal, 12 dB/octave. In-room frequency response is 22 Hz - 25 kHz (room dependent), and sensitivity is 86 dB (1 W, 1 m). Height is 860 mm (910 mm including plinth, base and spikes), width 200 mm and depth 190 mm.

Engineering and use context

Its new tweeter has a double ferrite magnet system and copper-clad aluminium voice coil wire on a fibreglass former with a Faraday copper ring. Because it has a higher output, Russell K reshaped the tweeter response curve to match the bass/mid driver, with the phase response left unchanged. Tweeter attenuation remains a misaligned Zobel network in place of an L-pad.

The sub-bass inductor is an enclosed-field iron core coil, now with a larger frame and thicker wire. A second coil sits in the negative return path, so the sub-bass circuit is balanced. The bass/mid path uses an enclosed-field ferrite core inductor. All drivers are connected in positive phase, each has one component in its signal path, and the crossover is phase-optimised through the crossover region.

Each bass unit has a high-power ferrite magnet and a 25 mm voice coil on an aluminium former with a Faraday distortion-cancelling copper ring. The cabinet is totally undamped and built from 16 mm MDF, with a 19 mm front baffle. Three acoustic loading bracing shelves with multiple apertures are mounted below the drivers, and a fourth shelf near the bottom contains an internal port. That port vents into a small chamber with two reflex ports of asymmetric length, tuned as a system to 21 Hz.

A polymer insert is added to the double plinth system of the Red 120 for better isolation from the floor, and the spikes are improved.

Pairing

An amplifier of medium to high power is required. The plinth, base and spikes are part of the speaker, and no stand is needed.

Alternatives

The Red 120 is the standard version in the same cabinet, with a bass/mid crossover at 2,200 Hz and system tuning to 24 Hz.

Specifications

  • Model name

    Red 120Se

  • Frequency Response low +/- 3dB (Hz)

    22

  • Frequency Response high +/- 3dB (Hz)

    25 000

  • Sensitivity (dB at 1 W/1m)

    86

  • Impedance (Ohms)

    N/A

  • Power amplifier requirements (W)

    N/A

  • Has internal amplification

    N/A

  • Internal amplification power (W)

    N/A

  • Size (sm)

    91.0 x 20.0 x 19.0

  • Weight (kg)

    N/A

  • Official link

More components