Hifiverse

Floorstanding loudspeakers - Krix Loudspeakers Phoenix Evara

Description, images, technical data and specifications

Krix Loudspeakers Phoenix Evara
Image source - (c) Krix Loudspeakers

The Phoenix Evara is a two-way floorstanding loudspeaker from Krix of Hackham, South Australia, which has engineered and manufactured loudspeakers in Australia since 1974. It is the only floorstanding model in the Evara range, and Krix places it above the Evara bookshelf models for deeper bass extension and higher output. Its published specifications are the same as those of the Phoenix Mk2 from the Krix hi-fi catalogue. The list price is AUD 2,695 per pair, with a 5-year warranty.

Key specs that matter

Configuration is D'Appolito two-way, in a bass reflex enclosure. Frequency range is 35 Hz - 40 kHz (in-room response), and sensitivity is 91 dB (2.83 V/1 m). Impedance is 6 ohms nominal (minimum 3.5 ohms). Recommended amplifier power is 50 - 200 W RMS. Each speaker measures 950 x 195 x 295 mm (H x W x D) including feet and weighs 18 kg.

Engineering and use context

Two low-frequency drivers with nominal 165 mm laminated polypropylene cones are mounted above and below the tweeter. Each has a 33 mm voice coil wound on a high-powered aluminium former, a ventilated spider and an aluminium flux stabilisation ring for low distortion. Between them sits a 26 mm dual concentric diaphragm with a wave-guide centre plug for controlled directivity. Its non-reflective, dual-chambered magnet structure carries a copper shorting ring to lower distortion. Krix vents the cabinet at the rear and stiffens it with internal X bracing.

Like all Evara models, the Phoenix Evara is handcrafted in Australia. Five finishes are offered - Studio Black, Studio White, Studio Navy, Studio Charcoal and Studio Green. With Studio White the magnetic grille is Mid-grey, and the four other finishes have a Charcoal grille. Krix names living rooms, open-plan spaces and media rooms as intended locations, for both music and home cinema.

Pairing

Dual gold-plated binding posts allow bi-wiring or bi-amping. The matching centre speaker is the Graphix Evara, and the Dynamix Evara covers the side and rear surround channels. Seismix 1 Evara and Seismix 3D Evara are the matching subwoofers.

Alternatives

The Harmonix Mk2 is a three-way Krix floorstanding speaker with a sealed midrange chamber inside a bass reflex cabinet, rated at 90 dB, 1040 mm high and weighing 28 kg.

Specifications

  • Model name

    Phoenix Evara

  • Frequency Response low +/- 3dB (Hz)

    35

  • Frequency Response high +/- 3dB (Hz)

    40 000

  • Sensitivity (dB at 1 W/1m)

    91

  • Impedance (Ohms)

    6

  • Power amplifier requirements (W)

    50 - 200

  • Has internal amplification

    N/A

  • Internal amplification power (W)

    N/A

  • Size (sm)

    95.0 x 19.5 x 29.5

  • Weight (kg)

    18

  • Official link