The Perix (written πerix by the maker) is a passive two-way satellite loudspeaker from AKu Audio of Athens, Greece. It is the main speaker of a system for home theatre and desktop audio that AKu offers in 2.1, 5.1 and 7.2 layouts and custom configurations. AKu Audio was formed as a company in 2014, and its name comes from the Greek word for listen. Three stand options are available.
Key specs that matter
Each satellite has one 140 mm midwoofer and one 19 mm tweeter, with a passive crossover at 3 kHz. Frequency response is 140 Hz - 22 kHz (±3 dB). Sensitivity is 90 dB (2.83 V/1 m), nominal impedance is 3 ohms and maximum SPL is 106 dB. Recommended amplifier power is 50 - 150 W RMS. Connection is by a 6.3 mm jack. Without a stand the satellite measures 320 x 222 x 132 mm (H x W x D) and weighs 4.3 kg. On the floor stand it measures 1200 x 248 x 340 mm and weighs 8.65 kg.
Engineering and use context
Its 140 mm midwoofer has a coated fibreglass cone, a die-cast aluminium chassis and a low-damping SBR surround, and the tweeter has a damped silk diaphragm. The crossover is a second-order Butterworth design with polypropylene capacitors, air-core inductors and Zobel networks. AKu proposes a 150 Hz high-pass filter with a fourth-order (24 dB) Butterworth slope for the satellite. Inside the stacked MDF cabinet are two chambers with non-planar internal surfaces, and left and right units are mirror images.
Stands are laser-cut steel. AKu designed the floor stand so that the tweeter is at ear height for the typical listener. A desktop stand and a wall mount, fixed with three screws and adjustable on two axes, are the other options. Finishes are Primary Red, Ivory Black and Titanium White.
Of the Perix subwoofers, the v2.1 model has a 254 mm aluminium long-excursion woofer and a 254 mm aluminium passive radiator with 250 W, and the v5.1-7.2 model has two opposed 254 mm paper woofers in push-push with 500 W. Each uses a custom AKu-Hypex Ncore amplifier with DSP and three presets.
Pairing
An amplifier or AV receiver rated for 3-ohm loads is required. The matching subwoofers are the Perix sub v2.1 and v5.1-7.2, and the matching center channel is the Perix center.
Alternatives
The Onar is AKu Audio's standmount loudspeaker system.