Hifiverse

Floorstanding loudspeakers - Verity Audio Otello

Description, images, technical data and specifications

Verity Audio Otello
Image source - (c) Verity Audio

Otello is a floorstanding loudspeaker from Verity Audio, the Canadian company founded in 1995. It is a single-tower three-way bass-reflex design made of two isolated yet attached cabinets, and Verity aims it at moderate-size rooms. According to the brochure, it inherits technologies of the Parsifal Anniversary. Its owner's manual, release 2.0, is dated June 2020 and carries a 2018 copyright.

Key specs that matter

Drive units are an SD-2 soft neo ring dome tweeter, a 127 mm doped polypropylene midrange with a 50 mm SD-1 motor and two 178 mm woofers with edge-coated reed/paper pulp cones. Bandwidth is 30 Hz - 50 kHz (±3 dB). Sensitivity is 93 dB (2.83 V rms/1 m, on-axis), and impedance is 8 ohms nominal, 4 ohms minimum. Verity gives a minimum recommended power of 18 W into 8 ohms and power handling of 100 W music power. Each speaker measures 276 x 472 x 1,107 mm (W x D x H), and a pair weighs 77 kg.

Engineering and use context

Inside the top cabinet are the tweeter and an Audio Technology midrange on a phase and time alignment front baffle. This midrange has a special-geometry, mineral-filled polypropylene cone and a 50 mm symmetrical-drive voice coil. Both woofers sit in the bottom cabinet and work in parallel. Their paper-pulp cones carry randomized reed stiffening elements, and Verity uses Bessel tuning with its rear-firing woofer configuration.

Between the cabinets is a constrained layer platform coupled with special elastomers. Under the bottom cabinet sits the MASIS isolation base, a shell containing special materials that act as an acoustic resonator and filter, standing on four adjustable cushioned knurled feet. The crossover combines first-order slopes between woofers and midrange with third-order slopes between midrange and tweeter, and all components are computer-matched and indexed. Each cabinet has a proprietary asymmetrical internal bracing array. Break-in time is 75 hours to 63% and 400 hours to 99%. Italian polyester lacquer covers all sides, in high-gloss black or white, with Makore in high-gloss or hand-oiled form as the wood option. A five-year limited warranty applies.

Pairing

Verity lists the Otello as compatible with a wide range of power amplifiers, single-ended triode designs included. On tube amplifiers with multiple output taps, the 8-ohm taps are specified. Input power must not exceed 150 W rms (30 V rms). The five-way binding posts accept banana plugs, spades or bare wire, with spades recommended.

Alternatives

The Verity Audio Arindal is a larger two-cabinet floorstanding loudspeaker with a 241 mm carbon-paper sandwich cone woofer.

Specifications

  • Model name

    Otello

  • Frequency Response low +/- 3dB (Hz)

    N/A

  • Frequency Response high +/- 3dB (Hz)

    N/A

  • Sensitivity (dB at 1 W/1m)

    93

  • Impedance (Ohms)

    8

  • Power amplifier requirements (W)

    >18

  • Has internal amplification

    N/A

  • Internal amplification power (W)

    N/A

  • Size (sm)

    27.6 x 47.2 x 110.7

  • Weight (kg)

    77 (pair)

  • Official link

More components