Hifiverse

Floorstanding loudspeakers - Emotiva Nostala LB12

Description, images, technical data and specifications

Emotiva Nostala LB12
Image source - (c) Emotiva

The Nostala LB12 is a three-way floorstanding loudspeaker from Emotiva, described by the company as a modern interpretation of a classic vintage three-way floor standing loudspeaker. It is sold as a pair, and the pairs are mirror-imaged. Each pair comes with two sets of magnetic grilles, one in beige and one in grey. Emotiva covers the LB12 with a ten-year limited warranty for the original owner.

Key specs that matter

Configuration is three-way with dual front ports. The driver complement is a 28 mm (1 in.) silk dome tweeter, a 5-1/4 in. HyperDome soft fabric midrange and a 12 in. paper cone woofer. Crossover points are 200 Hz (woofer/midrange) and 2 kHz (midrange/tweeter), both at 12 dB/octave. Frequency response is 40 Hz - 32 kHz (±3 dB). Efficiency is 91 dB (2.83 V/1 m), and nominal impedance is 8 ohms. Power handling is 150 W continuous and 350 W peak, with a recommended amplifier power of 100 W or more. Without feet, each cabinet measures 762 x 394 x 368 mm (H x W x D). The feet add about 64 mm of height and the grille about 13 mm of depth. Weight is 32.2 kg per speaker, unboxed.

Engineering and use context

Behind the silk dome sits a neodymium magnet assembly with a machined aluminium face plate and an aluminium wire voice coil with a copper shorting ring. The HyperDome midrange transducer has a rubber surround, a neodymium magnet structure and a 75 mm aluminium voice coil, also with a copper shorting ring. Its woofer uses a die-cast frame, dual 140 mm magnets, an NBR surround and a four-layer 50 mm voice coil with an aluminium shorting ring.

Emotiva builds the cabinet from heavy, acoustically inert HDF with internal bracing and acoustic damping. Genuine walnut veneer covers all surfaces, so the grain differs from speaker to speaker, and the front baffle is fully finished for use without grilles. Badges are machined solid metal. Two metal toggle switches on the rear adjust the midrange and tweeter levels, each with a centre Flat position. Wooden feet with nylon buttons are permanently attached, yet they can be removed for use on third-party stands. Grilles are fabric over MDF.

Pairing

Dual 5-way terminals allow bi-wiring or bi-amping once the jumpers are removed. Emotiva names modern solid-state amplifiers, receivers and AV receivers as partners. The LB12 can be used in a stereo system or in a home theatre system.

Alternatives

The Airmotiv XT3 is Emotiva's three-way floorstanding tower with a 32 mm folded ribbon tweeter, two 5.25-inch midrange drivers and three 8-inch woofers.

Specifications

  • Model name

    Nostala LB12

  • Frequency Response low +/- 3dB (Hz)

    40

  • Frequency Response high +/- 3dB (Hz)

    32 000

  • Sensitivity (dB at 1 W/1m)

    91

  • Impedance (Ohms)

    8

  • Power amplifier requirements (W)

    >100

  • Has internal amplification

    N/A

  • Internal amplification power (W)

    N/A

  • Size (sm)

    76,2 × 38 × 35,6

  • Weight (kg)

    32.2

  • Official link

Related content

More components