Hifiverse

Floorstanding loudspeakers - Tune Audio Marvel

Description, images, technical data and specifications

Tune Audio Marvel
Image source - (c) Tune Audio

The MARVEL is a two-way, horn-loaded floorstanding loudspeaker from Tune Audio of Voula, Attiki, in Greece, made by hand in Athens. Tune Audio presents it as the purity of a single driver with a boost. A wide-range cone covers bass and midrange, a back-loaded bass horn extends it at the bottom, and a compression driver on a tractrix horn completes the top. Tune Audio states that the MARVEL is easy to drive even by a low-powered SE amplifier.

Key specs that matter

System sensitivity is 97 dB and nominal impedance is 8 ohms. Recommended amplifier power is more than 5 W. A first-order crossover divides the bands at 2.5 kHz. Bass and midrange come from a 203 mm wide-range driver modified in house, and the high frequencies from a 25 mm compression driver with a titanium diaphragm. Each cabinet measures 320 x 1,490 x 560 mm (W x H x D) and weighs 42 kg net.

Engineering and use context

The 203 mm driver loads a back-loaded bass horn that is down-firing, toward the floor, and is built from grade A, 13-layer Baltic birch plywood. Mid frequencies are radiated directly by the cone. High frequencies are horn-loaded by a tractrix horn cast from a proprietary epoxy compound. This horn is mounted on the side of the bass horn and is mechanically time-aligned for a time-coherent result.

Located at the bottom of the bass horn, the crossover is well away from the magnetic fields of both drivers, and its parts are spaced apart to avoid interference. All components are hard-wired. Internal wiring is custom-made from high-purity OFC copper with waxed cotton insulation. Brass bracing parts are used with felt acoustic isolation. Both the level and the beaming of the high-frequency horn are user-adjustable. Finish is chosen by the customer, from any paint colour to natural wood veneer.

Pairing

Tune Audio recommends low to mid powered tube or solid-state amplifiers with low or no feedback. A low-powered single-ended amplifier is within the recommended range.

Alternatives

The Tune Audio PRIME is a smaller floorstanding horn loudspeaker with a down-firing bass horn, a horn-loaded super tweeter, a 6.3 kHz crossover point and 93 dB sensitivity.

Specifications

  • Model name

    Marvel

  • Frequency Response low +/- 3dB (Hz)

    N/A

  • Frequency Response high +/- 3dB (Hz)

    N/A

  • Sensitivity (dB at 1 W/1m)

    97

  • Impedance (Ohms)

    8

  • Power amplifier requirements (W)

    >5

  • Has internal amplification

    N/A

  • Internal amplification power (W)

    N/A

  • Size (sm)

    149 × 32 × 56

  • Weight (kg)

    42

  • Official link

More components