Hifiverse

Floorstanding loudspeakers - Linkwitz LXsirius – superslim

Description, images, technical data and specifications

Linkwitz LXsirius – superslim
Image source - (c) Linkwitz

The LXsirius - superslim is an active two-way floorstanding loudspeaker from Linkwitz, the company that continues the work of the late Siegfried Linkwitz. The maker presents it as a more economical route to its design ideas than the larger LX521, matching that model in most respects apart from the deep bass extension of the bigger system. Each tall tower shows a front width of only 9 cm, which gives the model its superslim label.

Key specs that matter

Each side carries one custom SEAS 5 inch L16RN-SL woofer and one custom SEAS 4 inch H1600-04 full-range driver. The two are split at 700 Hz by a second-order Linkwitz-Riley filter built in an analogue or digital signal processor. Linkwitz quotes a range of 45 Hz to 20 kHz at -3 dB, sensitivity of 85 dB at 1 W and 1 m, a nominal impedance of 6 ohm and a maximum level of 98 dB, with pairs matched to within 0.5 dB. Overall dimensions are 103 cm high, 31 cm wide and 32 cm deep, and a single tower weighs 9 kg. Finishes listed are dull anthracite black, dull white, chalk and a hand-painted version by the artist Jim Avignon.

Engineering and use context

The woofer fires into an infinite transmission line, a padded cylindrical air chamber. Its rear wave travels down the tube, reflects at the base and returns upward about 40 dB weaker than the original. Above the crossover the full-range unit works on an open baffle, and a structure behind it both diffuses and attenuates the rear radiation. The resulting directivity changes with frequency - omnidirectional up to the crossover, cardioid from there to 900 Hz, and damped dipolar above 900 Hz. The maker says this cuts reflections from objects behind the speaker and lowers its dependence on placement, while still asking for at least 1 m from side walls and from the wall behind. A massive walnut piece forms the rear support, and the construction avoids a conventional box.

Pairing

Every driver needs its own amplifier channel, fed through SpeakOn plugs, and Linkwitz recommends 60 to 125 W per channel. A bundle adds the PowerBox 6pro NCore, a six-channel NCore amplifier, together with SpeakOn multicore cables, and pair prices run from EUR 2,356.20 to EUR 8,318.10 including VAT depending on configuration. For deeper bass the tower can be joined by LXsub2 or LXsub4 dipole woofers, and the LXsirius+2 package turns it into a three-way system with two LXsub2 units.

Alternatives

The Linkwitz LX521.4 is a larger active four-way dipole floorstanding speaker with two 10 inch aluminium woofers and ten channels of amplification.

Specifications

  • Model name

    LXsirius – superslim

  • Frequency Response low +/- 3dB (Hz)

    N/A

  • Frequency Response high +/- 3dB (Hz)

    N/A

  • Sensitivity (dB at 1 W/1m)

    N/A

  • Impedance (Ohms)

    N/A

  • Power amplifier requirements (W)

    N/A

  • Has internal amplification

    N/A

  • Internal amplification power (W)

    N/A

  • Size (sm)

    N/A

  • Weight (kg)

    N/A

  • Official link

More components