The HARLEKIN 2 is a floorstanding loudspeaker from Acapella Audio Arts of Duisburg, Germany. For more than twenty years the Harlekin has been the entry point to the Acapella range, and for the second generation the company transferred experience from its reference systems Hyperion and Sphäron to this model. The US list price is USD 32,000 per pair.
Key specs that matter
Acapella lists a 254 mm low-mid driver in a ventilated system and a 43 mm midrange driver. Frequency range is 20 Hz - 20 kHz. Efficiency is 91 dB (1 W/1 m), and impedance is 8 ohms. Each speaker measures 1205 x 295 x 460 mm (H x W x D) and weighs 75 kg. Load capacity is 100 W - 1000 W for a 10 ms pulse.
Engineering and use context
Only the outward design of the earlier Harlekin was kept. Acapella describes the HARLEKIN 2 as taken back to the drawing board, with completely new drivers, a completely redesigned crossover, new internal cabling and resonance tuning. Its enclosure is ventilated, and according to Acapella this gives deeper bass reproduction.
Bass extends to 20 Hz, and Acapella states that this comes without amplifier complications. The company calls the HARLEKIN 2 a full-range system without the space requirements of larger speakers and names rooms of 12 to 40 m2 as its intended setting.
The HARLEKIN 2 is built by hand in Germany. Standard veneers include maple, cherry and pear. Almost any automotive paint colour can be ordered for the horn and acrylic colours for the cabinet at no extra cost.
Pairing
An amplifier rated for an 8-ohm load is required. The load capacity allows amplifiers of up to 1000 W on 10 ms pulses. Acapella's own amplifiers are the Energèia models.
Alternatives
The Acapella LaCampanella 2 MK II is a slimmer floorstanding loudspeaker with four 165 mm woofers and a 450 mm hyperspherical broadband horn, rated at 93 dB (1 W/1 m).