The EPIKORE 11 is the flagship of the EPIKORE series from DALI of Denmark and sits above the EPIKORE 9, the EPIKORE 7 and the EPIKORE 3 stand-mount. DALI presents it as the evolution of its EPICON series, with several technologies taken from the flagship DALI KORE, and as a celebration of the company's 40 years. Lenbrook Americas showed it at CEDIA Expo 2023 in Denver, with a launch in August 2023 at USD 60,000 or CAD 75,000 per pair. Each unit is developed, designed and built by DALI in Denmark.
Key specs that matter
This is a 4½-way floorstanding loudspeaker with four 203 mm woofers, one 165 mm midrange and the EVO-K Hybrid Tweeter module, which combines a 35 mm soft dome with a 10 x 55 mm planar magnetostatic tweeter. Crossover frequencies are 170 Hz, 370 Hz, 3.1 kHz and 12.5 kHz. Frequency range is 29 Hz - 34 kHz (±3 dB). Sensitivity is 89 dB (2.83 V/1 m), nominal impedance is 4 ohms and maximum SPL is 116 dB at 1 m. Recommended amplifier power is 40 - 1,000 W. Each speaker measures 1602 x 422 x 554 mm (H x W x D) and weighs 75.6 kg with grille.
Engineering and use context
SMC Gen-2, the latest generation of DALI's patented magnet material, was introduced in the KORE. Here it is used in the bass and midrange drivers and in the cores of the SMC KORE Crossover Inductors. Compared with air-core inductors, these give lower DC resistance, a shorter signal path and less crosstalk between inductors, and DALI quotes around 12 dB less current distortion than equivalent iron-powder core inductors. Hand-picked capacitors and resistors complete the crossover.
Its midrange is an evolution of the 165 mm EPICON 8 unit, with a Clarity Cone paper and wood fibre diaphragm whose embossed geometric structure comes from the KORE, a titanium voice coil and an SMC Gen-2 magnet system. All four woofers have large SMC Gen-2 magnet systems and paper and wood fibre cones. Within the EVO-K module, both the large in-house-developed soft dome and the improved planar element use neodymium magnet motor systems.
Dual-flare bass reflex ports, die-cast baffles and new high-end binding posts are part of the design. The curved cabinet carries laminated real wood veneer under piano-finish lacquer, offered in high gloss black, maroon, white and walnut.
Pairing
An amplifier stable into 4 ohms is required. The binding posts come with jumpers for single-wire connection. Adjustable aluminium outriggers with spike feet are supplied.
Alternatives
The EPIKORE 9 is the next floorstanding model down in the same DALI series.