The Electron SE is the upgraded version of the Electron floorstanding loudspeaker from Tekton Design, the company founded by Eric Alexander in Orem, Utah. It is listed in the Mid Towers group at USD 3,140 per pair, reduced from USD 3,700. Like the Electron, it uses a scaled-down version of the Double Impact driver configuration, and Alexander, credited by Tekton as inventor and audio designer, describes the SE as having upgraded drivers and crossover components.
Key specs that matter
Two 203 mm high-output Electron SE transducers, two 127 mm mid-bass transducers and the patented tweeter array make up the driver complement. Frequency response is 30 Hz - 30 kHz. Sensitivity is 96 dB (2.83 V/1 m). It is a 4 ohm design, and power handling is 300 W. Each speaker measures 1219 x 257 x 349 mm (H x W x D) and weighs 38.6 kg.
Engineering and use context
Tekton makes the Electron SE under US Patent 9247339 as a proprietary four-way loudspeaker. Its tweeter array is low-mass and polygon-oriented, and according to Tekton it gives the focused output of a horn without the associated distortion.
Solid billet copper Cardas inputs, made in the USA, and mil-spec internal wiring are standard. In the tweeter section the capacitors are Mundorf or ClarityCap, while the woofer section uses an oversized Jantzen or Erse Sledgehammer inductor, with the brand of each part depending on supplier availability.
Compared with the standard Electron, the mid-bass transducers grow from 102 mm to 127 mm, sensitivity rises from 95.0 dB to 96 dB and power handling from 200 W to 300 W. Height is the same, and each speaker is about 10 kg heavier.
Beryllium tweeter upgrades are offered for the array. Paint comes in standard gloss or high gloss, and high gloss has a longer lead time. Grilles are shipped separately, and footer styles are selectable. Tekton manufactures the Electron SE in the USA.
Pairing
An amplifier stable into 4 ohms is required. Optional terminals allow bi-wiring, with discrete cables for high and low frequencies, or bi-amping with dual amplifiers, each at USD 150. The 300 W rating is power handling, not a minimum amplifier power.
Alternatives
The Tekton Design Electron is the standard version, with two 203 mm woofers, two 102 mm mid-bass drivers, 95.0 dB sensitivity and 200 W power handling, at USD 2,200 per pair.