Hifiverse

Floorstanding loudspeakers - TOTALDAC d120

Description, images, technical data and specifications

TOTALDAC d120
Image source - (c) TOTALDAC

The d120 is a passive floorstanding horn loudspeaker from TOTALDAC, the French manufacturer of R-2R digital-to-analogue converters built with Vishay foil resistors of 0.01% tolerance. Besides converters the range covers streamers, a CD transport, reclockers, active crossovers, an amplifier and cables. TOTALDAC presented the d120 in April 2024 as a speaker made to develop the electronics and to demonstrate a full system, and used it at High End Munich in May 2024. It is made in France.

Key specs that matter

Design is 2.5-way, with two 12-inch drivers and a 1-inch compression driver with an organic dome on a constant directivity horn. Both 12-inch drivers work in the bass, and only the top one also covers the midrange. The horn is used only above 3 kHz, and treble extends to 24 kHz. Sensitivity is 98 dB (2.83 V/1 m), and average impedance is 8 ohms. In-room bass cut-off is 25 Hz (-6 dB). Dimensions are 374 x 1265 x 605 mm (W x H x D, including base and feet), and weight is 68 kg.

Engineering and use context

The lower 12-inch unit is a high-force neodymium bass driver. Above it sits a custom bass/mid driver on a wooden chassis, and TOTALDAC states that most of the sound comes from the top of the speaker. The horn and the back chamber of the compression driver are made of solid wood.

According to TOTALDAC the d120 uses the same drivers and crossover as the d110 in a much more complex cabinet. Cabinet and internal diffusors are solid French wood with an oil finish. The 3D-curved cabinet is thicker and more reinforced, has no parallel walls and is lined inside with wooden diffusors.

The crossover is point-to-point wired without PCB traces, using only the component legs, and sits in its own wooden enclosure. It uses air coils and Claritycap PUR capacitors, and the bass inductor is wound from 5 mm2 copper wire. Mundorf binding posts accept banana plugs and spade connectors. The d120 is prepared for an active crossover in the bass.

Pairing

The bass section can also be driven through an active crossover. TOTALDAC makes the matching active crossovers and amplifier.

Alternatives

The d112 is a TOTALDAC floorstanding loudspeaker with two 12-inch drivers, a compression driver on a solid-wood horn and a choice of solid wood or painted birch plywood cabinets.

Specifications

  • Model name

    d120

  • Frequency Response low +/- 3dB (Hz)

    25

  • Frequency Response high +/- 3dB (Hz)

    25000

  • Sensitivity (dB at 1 W/1m)

    98

  • Impedance (Ohms)

    N/A

  • Power amplifier requirements (W)

    N/A

  • Has internal amplification

    N/A

  • Internal amplification power (W)

    N/A

  • Size (sm)

    37.4 x 60.5 x 126.5

  • Weight (kg)

    68

  • Official link