The ClairAudient Bellare is a floorstanding loudspeaker from Audience of California that combines passive wideband drivers with an internally powered, DSP-controlled bass section. It made its debut at T.H.E. Show New York in autumn 2025, was also shown at CAF 2025 and became available in March 2026. Two versions are built - the Monopole at USD 36,000 per pair and the Bi-pole at USD 39,000 per pair.
Key specs that matter
Each Monopole speaker has two front-mounted Audience TimeWave 3 (TW3) 76 mm wideband drivers, and the Bi-pole adds two rear-mounted TW3. Below them sit a TimeWave 7 (TW7) 178 mm high-excursion mid-woofer and a side-mounted 254 mm high-excursion woofer. Transition between the wideband drivers and the bass section is at about 140 Hz nominal. Frequency response is 18 Hz - 22 kHz (±3 dB), and the TW3 extends to about 42 kHz. Sensitivity is 86 dB (1 W/1 m) for the Monopole at 8 ohms nominal, and 88 dB (1 W/1 m) for the Bi-pole at 4 ohms nominal, with a minimum of about 3.8 ohms near 1 kHz. Audience specifies about 105 dB continuous output without driver compression. A 300 W class D DSP amplifier is built into each speaker. Dimensions are 1168 x 241 x 457 mm (H x W x D), and weight is about 45 kg per speaker.
Engineering and use context
On the TW3 drivers the high-pass is a passive second-order network with air-core inductors and Auricap XO-PUR-CT capacitors. For the lower TW3 a copper-foil air-core inductor gently attenuates the upper frequencies to reduce comb filtering. Low-pass filtering of the bass section is active and DSP-controlled. Its internal amplifier takes the signal from the external amplifier's speaker connection, so no line-level link is needed. Bass level and phase are user-adjustable, and the level can also be set from the supplied remote control. Both rear TW3 of the Bi-pole operate in phase with the front pair.
Its cabinet is a sealed, internally braced and compartmentalised enclosure on Stillpoints Ultra 1S isolation footers. Audience supplies a forte f3 powerChord for each speaker.
Pairing
An amplifier of at least 30 W continuous output is recommended. Minimum amplifier power is 10 W into 4 ohms for the Bi-pole and 20 W into 8 ohms for the Monopole. Each speaker needs a mains connection for its bass amplifier.
Alternatives
The ClairAudient 16+16 Mk II is the other floorstanding loudspeaker from Audience, built as a bipole wideband driver array.