Hifiverse

Floorstanding loudspeakers - Melodika BL40 MK3

Description, images, technical data and specifications

Melodika BL40 MK3
Image source - (c) Melodika

The BL40 MK3 is a 2.5-way passive floorstanding speaker in the Back in Black series from Melodika, the Polish maker of cables and loudspeakers established in 2015. It is the third generation of the BL40, which Melodika describes as one of the biggest bestsellers on the Polish audio market. Compared with the MK2, the bass reflex port has moved to the front, the crossover has been retuned with higher-class components and the speaker terminals have been upgraded. The price is EUR 799 per pair.

Key specs that matter

Its driver complement is a 25 mm Diamond Silk Dome tweeter, a 165 mm mid/woofer and a 165 mm woofer, all dynamic drivers. Crossover frequencies are 1 kHz and 3.4 kHz. Frequency response is 38 Hz - 20 kHz, sensitivity is 92 dB and impedance is 8 ohms, with a maximum power of 200 W. Loading is bass reflex with a front port and no passive membrane. Bi-wire terminals are provided. With the base mounted each speaker measures 270 x 977 x 340 mm (W x H x D), or 210 x 947 x 325 mm without it, and weight is 20 kg. Melodika gives a five-year warranty.

Engineering and use context

MDF boards of increased quality form the cabinet, with reinforcing braces added in up to twenty places. Inside, bituminous mats in Daltech technology and felts damp and weight the enclosure. The front port required a new tuning of the speaker.

A soft dome of soaked, stiffened silk is used in the tweeter, driven by a neodymium magnet system with protection against overheating. Its dome is surrounded by a flange with a short tube connected to a metal acoustic diffuser. Both 165 mm units have diaphragms of dense braided glass fibre bonded with resin. On the mid/woofer a fixed aluminium phase plug corrects the phase, and a classic fold surround allows deep excursion. The woofer diaphragm is a modified version of the midrange one, with a stiffening and weighting dust cap that reduces distortion at high excursion and prevents the cone from bending. Each cone driver has a shielded magnetic system.

Every cabinet sits on a removable plinth painted in high gloss, equipped with anodised heavy spikes with adjustment and lock nuts that allow the speaker to be inclined. Terminals are steel coated with a layer of gold against corrosion. Grilles are included as standard.

Pairing

A stereo amplifier or AV receiver rated for 8 ohm loads is required. The terminals allow bi-wiring with a double pair of cables.

Alternatives

The BL30 MK3 is the smaller 2.5-way floorstanding speaker in the Melodika Back in Black series.

Specifications