Hifiverse

Floorstanding loudspeakers - Bang & Olufsen Beolab 90 Mirage Edition

Description, images, technical data and specifications

Bang & Olufsen Beolab 90 Mirage Edition
Image source - (c) Bang & Olufsen

The Beolab 90 Mirage Edition is one of five Atelier limited editions of the Beolab 90 active floorstanding loudspeaker, made by Bang & Olufsen for its 100th anniversary. It was announced on 11 December 2025 and presented at the company's Culture Store in San Francisco. Production is ten pairs worldwide, each with a certificate of authenticity, and the price is given on request. Acoustic hardware is that of the Beolab 90 introduced in 2015, designed with Noto GmbH.

Key specs that matter

Each speaker carries 18 Scan-Speak drivers - seven 25 mm Illuminator tweeters, seven 114 mm Illuminator midrange units, three 254 mm Discovery woofers and one 330 mm Revelator front woofer. Amplification per speaker is fourteen Bang & Olufsen ICEpower AM300-X channels for tweeters and midrange plus four Heliox AM1000-1 class D amplifiers for the woofers, 8,200 W in total. Frequency range is below 12 Hz to above 43 kHz. Maximum SPL is 126 dB at 1 m per pair, with a bass capability of 118 dB SPL. Each speaker measures 73.5 x 125.3 x 74.7 cm (W x H x D) and weighs 137 kg.

Engineering and use context

Its main cabinet is cast in solid aluminium, weighs 65 kg and holds the four woofers and the electronics, with the drivers pointing in different directions. Beam Width Control sets the dispersion to Narrow, Wide or 360-degree omnidirectional, and Beam Direction Control defines one of five sides as the acoustic front. Adaptive Bass Linearization and thermal protection are part of the signal processing. Every Beolab 90 is tested in the company's anechoic chamber.

The Mirage Edition differs in finish. A bespoke gradient anodisation, applied entirely by hand at Factory 5, covers the aluminium components, and the surface appears to shift from blue to magenta as the viewer moves around the speaker. Base panels are machined from raw aluminium and given a rippled texture that symbolises sound waves. A new knitted fabric carries the same gradient and leaves the drivers visible through it.

Pairing

No external amplifier is required. The primary speaker has RCA and fully balanced XLR analogue inputs, S/PDIF (24-bit/192 kHz), optical (24-bit/96 kHz) and USB-B (24-bit/192 kHz) digital inputs, plus USB-A and Ethernet. Wireless inputs are WiSA (24-bit/96 kHz) and Wireless Power Link.

Alternatives

The Bang & Olufsen Beolab 50 is another active floorstanding loudspeaker from the brand.

Specifications

  • Model name

    Beolab 90 Mirage Edition

  • Frequency Response low +/- 3dB (Hz)

    N/A

  • Frequency Response high +/- 3dB (Hz)

    N/A

  • Sensitivity (dB at 1 W/1m)

    N/A

  • Impedance (Ohms)

    N/A

  • Power amplifier requirements (W)

    N/A

  • Has internal amplification

    N/A

  • Internal amplification power (W)

    N/A

  • Size (sm)

    125.3 x 73.5 x 74.7 (73.5)

  • Weight (kg)

    137

  • Official link