The Bellatrix is a floorstanding loudspeaker from Divine Acoustics of Poland, designed by Piotr Galkowski. Work on it began in 2017, and the maker states that the design took nearly four years. Each pair is built by hand in a process of more than ten weeks.
Key specs that matter
Bellatrix is a 2.5-way design with a multi-chamber bass-reflex / TQWT system vented at the bottom. Woofer and mid-woofer are two modified 178 mm Eton Orchestra drivers with embossed cellulose diaphragms on rubber surrounds. A 25 mm silk Scan-Speak Illuminator ring radiator, shielded by a metal protective mesh, is the tweeter. Frequency response is 35 Hz - 40 kHz, efficiency is 88 dB and impedance is 4 ohms. Recommended amplifier power is 10 - 160 W, and the recommended room area is 16 - 40 m2. Net weight is 29 kg per speaker.
Engineering and use context
According to Divine Acoustics, the multilayer enclosure is made in its CRCdesign technology, with a separate chamber for the tweeter. Inside, a grating of plywood and steel reinforces the walls, and mineral mats damp the panels. Both Eton units have solid die-cast baskets with the company's BAD damping system. The cabinet sits on a one-piece carbon steel pedestal integrated with the enclosure, and is equipped with Kepler vibration-absorbing feet.
Its crossover has 51 components mounted point to point. The woofer section is first order at about 250 Hz, and the mid-woofer section is first order at about 2.9 kHz, with baffle-step compensation and elliptical correction of diaphragm break-up resonances. For the tweeter there is a twin-path second-order slope at the same frequency, and all three sections include coil inductance compensation. Capacitors are Miflex KFPM-1 copper, Miflex MKP-10 foil, Jantzen Alumen and Jantzen Z-series types, alongside Superes metallised non-inductive resistors and cotton-insulated OFC coils. Solder joints are lead-free, the maker lists its SGP, ESM and RFpath techniques, and internal wiring is the in-house Halley cable. A single pair of uncoated pure copper binding posts is on the rear.
Finishes are Smoke and Mocca, and Snakewood is offered as a limited edition of 10 pairs.
Pairing
An amplifier stable into 4 ohms is required. A single pair of binding posts allows single-wiring only.
Alternatives
The Divine Acoustics Proxima is a slimmer sealed two-way floorstanding speaker with one 170 mm mid-bass driver, rated at 89 dB and 8 ohms.