Hifiverse

Floorstanding loudspeakers — Rega AYA

Description, images, technical data and specifications

Rega AYA
Image source - (c) Rega

AYA is a floorstanding loudspeaker from Rega, launched in 2023 at GBP 1,499 per pair. A team of Rega designers headed by founder Roy Gandy developed it over ten years. Rega names the ever-increasing cost of real wood veneered MDF cabinets as the reason it investigated other materials. Its cabinet is manufactured in the UK and moulded from GRC, or glass reinforced cement. It is one of two loudspeakers in the current Rega range, alongside the Kyte.

Key specs that matter

Design is a 2.5-way system in a band pass enclosure, front ported. Drive units are the Rega designed ZRR high frequency unit, a handmade 127 mm MX-125 bass mid driver and a handmade 178 mm RR7.8 bass driver. Impedance is 6 ohms, and sensitivity is 89.5 dB. Power handling is 110 W per channel, dependent on amplification. Each loudspeaker measures 258 x 871 x 215 mm (W x H x D) and weighs 14.1 kg. The finish is a Steel Grey front panel with a dark grey GRC cabinet.

Engineering and use context

According to Rega, the glass fibres in the GRC reduce the weight while increasing the structural integrity of the 2.5-way band pass enclosure. The moulding process for the cabinets was developed with Lazenby, a company in Yeovil best known for bespoke concrete furniture and flooring. Each cabinet differs because of the casting and finishing process. Changes in shade and small pin holes in the cement may occur, and Rega treats them as an expected part of the design. Its sculptured cabinet and stand give the AYA a floating appearance.

Both cone drivers are Rega designs and are made by hand. They are coupled with the ZRR tweeter through a new crossover developed for this model.

Loudspeaker grilles are an optional extra, supplied separately. Rega leaves them out of the box to keep costs low and avoid unnecessary waste, as most customers choose not to use them. The grilles are covered in speaker cloth and attach by magnet to the front plate screws to prevent cone or tweeter damage. Its terminals are colour coded red (+) and black (-). The AYA carries Rega's lifetime warranty against manufacturing defects.

Pairing

An amplifier rated for a 6 ohm load is required. Rega's own integrated amplifiers, such as the Brio, Elex MK4 or Elicit MK5, are the matching partners. Rega recommends speaker cable such as its Rega SC1, in equal lengths for both loudspeakers.

Alternatives

Rega has no other floorstanding loudspeaker, since the Kyte is a stand-mount model.

Specifications

  • Model name

    AYA

  • Frequency Response low +/- 3dB (Hz)

    N/A

  • Frequency Response high +/- 3dB (Hz)

    N/A

  • Sensitivity (dB at 1 W/1m)

    89.5

  • Impedance (Ohms)

    6

  • Power amplifier requirements (W)

    110

  • Has internal amplification

    N/A

  • Internal amplification power (W)

    N/A

  • Size (sm)

    258 x 871 x 215

  • Weight (kg)

    14.1

  • Official link

More components