The Auditorium + is the Plus version of the Auditorium, the first three-way loudspeaker from Clarisys Audio, a ribbon specialist with engineering teams in Vietnam and Switzerland. Clarisys describes the Auditorium as its second top model. Its predecessor, the original Auditorium, was shown at High End Munich 2023 with prices from USD 150,000. Clarisys listed the Plus at USD 149,000 per pair before tariffs raised it to USD 189,000, and the current Mk2 edition is quoted from USD 245,000.
Key specs that matter
Each speaker is a single panel of about 2100 x 930 x 460 mm (H x W x D) and weighs about 274 kg without its flight case. Nominal impedance is 6 ohms, made up of a 9 ohm bass panel, a 4 ohm midrange and a 3.3 ohm tweeter. Clarisys quotes 92 dB efficiency with neodymium magnets in the current specification, against 90 dB in the 2023 data. Bass extends to 20 Hz (-3 dB) and the upper limit lies above 20 kHz. Crossover points are 250 Hz and 5.5 kHz. The Munich 2023 version was quoted at 210 kg and just over 2 m tall.
Engineering and use context
There are no cones and no cabinet. Midrange and treble come from two pure aluminium ribbons mounted back to back and driven in phase, so above the lower crossover point the speaker radiates as a bipole, to the front and to the rear. Its midrange ribbon is divided into seven traces 42 mm wide, which Clarisys claims is the widest ribbon midrange in any loudspeaker, and the tweeter has three traces. Below 250 Hz a separate double-sided ribbon panel of almost full height reproduces the bass. All ribbons are identical and double-sided, and every motor uses neodymium magnets.
Each speaker has a passive first-order crossover in its own outboard box, with only four parts - Jantzen Superior Z capacitors and custom-wound inductors. The frame is a CNC-machined structure made entirely of aluminium. Clarisys assembles the speakers in Hanoi, and final tuning and quality checks take place in Zwingen, Switzerland. Crated, each speaker weighs more than 315 kg, and a shipping weight of 450 kg was quoted in 2023.
Pairing
Clarisys states that tube amplifiers connect through their lower-impedance output transformer taps. Solid-state and tube amplifiers of about 60 W to 200 W per channel, in class A and class AB, have been used with the Plus.
Alternatives
The Clarisys Audio Studio is the brand's smaller floorstanding ribbon loudspeaker, with neodymium magnets and a double-sided bass panel.