Hifiverse

Floorstanding loudspeakers - PS Audio Aspen FR20

Description, images, technical data and specifications

PS Audio Aspen FR20
Image source - (c) PS Audio

The Aspen FR20 is a passive three-way floorstanding loudspeaker from PS Audio of Boulder, Colorado, placed below the FR30 in the Aspen range. PS Audio specifies the same 10-inch planar midrange and the same in-room bass extension to 20 Hz as the FR30, in a one-piece cabinet for medium to large rooms. Industrial design is by Studio 63. The price is USD 22,999 per pair in Pearl White or Sable Black.

Key specs that matter

The driver complement is a 64 mm (2.5 in.) planar magnetic tweeter and a 254 mm (10 in.) planar magnetic midrange, both with Teonex diaphragms, and two 203 mm (8 in.) woofers with cast frames and carbon fibre Rohacell sandwich cones. Two 254 mm (10 in.) side-mounted passive radiators load the bass. Crossover frequencies are 400 Hz and 2500 Hz with Linkwitz-Riley 4th order acoustic slopes. Frequency response is 23 Hz - 20 kHz (-6 dB, half space), with in-room response to 20 Hz (-6 dB). Sensitivity is 87 dB (2.83 V/1 m). Nominal impedance is 4 ohms (min. 3.5 ohms), and recommended amplifier power is 50 - 300 W. Each speaker measures 1283 x 406 x 476 mm (H x W x D) and weighs 60.3 kg.

Engineering and use context

PS Audio states that it could not source the drivers it needed for the FR20 from outside driver manufacturers. The planar magnetic tweeter and midrange are driven by front and rear magnetic structures in a symmetrical push-pull neodymium motor, with directly driven low-mass diaphragms. Each woofer is a long-throw, high-excursion design with a 5.4 kg (12 lb) motor structure, a split magnetic gap and a double Faraday ring for low, linear inductance. A single progressive Nomex spider with stitched-in lead wires suspends the cone, which has a low-mass PMI foam core with non-woven carbon fibre skins on both sides. Instead of ports, the bass uses high-compliance passive radiators of PS Audio's own design.

Inside, the MDF cabinet is extensively braced. Its sculpted front baffle is formed from a thermoset fibreglass resin composite with integrated high-frequency waveguides. The exterior has 20 coats of hand-rubbed piano gloss lacquer. A curved bottom rests on an aluminium base with milled brass spikes that have removable tips, and integrated plastic feet are provided for hard floors.

Pairing

An amplifier stable into 4 ohms, with a minimum of 3.5 ohms, is required. The matching PS Audio amplifiers are the PMG Signature M400 monoblocks and the PMG Signature S400 stereo amplifier.

Alternatives

The Aspen FR10 is the smaller floorstanding model, with an 8-inch ribbon midrange and two 6.5-inch woofers.

Specifications

  • Model name

    Aspen FR20

  • Frequency Response low +/- 3dB (Hz)

    23

  • Frequency Response high +/- 3dB (Hz)

    20 000

  • Sensitivity (dB at 1 W/1m)

    87

  • Impedance (Ohms)

    4

  • Power amplifier requirements (W)

    50 - 300

  • Has internal amplification

    N/A

  • Internal amplification power (W)

    N/A

  • Size (sm)

    128.27 × 40.6 × 47.6

  • Weight (kg)

    60.3

  • Official link

More components