Hifiverse

Floorstanding loudspeakers - Albedo Aptica SG

Description, images, technical data and specifications

Albedo Aptica SG
Image source - (c) Albedo

Aptica SG is a 2-way floorstanding tower in linear phase from Albedo Audio of Italy, part of the Maestro Collection with its curved-wood cabinets. The line grew out of the earlier Albedo H2.2 and has passed through MKII and Second Edition versions before the current SG. In New Zealand the earlier Aptica was listed at NZD 14,750.

Key specs that matter

Two drivers are used - a 159 mm reinforced ceramic mid-woofer and a 25 mm CELL ceramic tweeter with the DSD acoustic trap. Crossover frequency is 3.0 kHz, with first- and second-order filters. Sensitivity is 85 dB (2.83 V/1 m), and nominal impedance is 8 ohms. Frequency response is 45 Hz - 32 kHz. Each speaker measures 195 x 265 x 1020 mm and weighs 24 kg net. Finishes are Black Oak and Black Lacquer.

Engineering and use context

Low frequencies are loaded by a transmission line filtered by a resonator, the Albedo Helmholine System. Its tuned Helmholtz resonator removes unwanted frequencies by selective acoustic filtering. Around the tweeter sits the DSD (Diffraction Shaping Device), a micro-perforated panel back-filled with absorbing material. At its resonance frequency the trap captures the sound wave and dissipates it as heat, reducing diffraction from the baffle edges.

For the SG version Albedo moved to the CELL type ceramic tweeter already used in its reference models. Its ultra-hard ceramic inverted dome diaphragm has its breakup placed above the audible range. A stronger neodymium magnet and a ventilated former for the titanium voice coil raise heat transfer and excursion, and Albedo quotes lower compression and harmonic distortion than before. A new handmade point-to-point crossover uses Mundorf capacitors and Mundorf coils.

The SG builds on two earlier revisions. MKII added a cabinet damping mechanism and a new mid-woofer with an oversized magnet and an oversized titanium voice coil for higher power handling and longer excursion. The Second Edition brought a revised crossover with a higher load impedance and silver internal wiring by Van den Hul. Both drive units have Accuton corundum (Al2O3) diaphragms and are supplied in matched pairs. This electrochemical process for thin corundum membranes was invented in 1984 by Bernhard Thiel, then production engineer at Backes & Müller.

Pairing

An amplifier rated into 8 ohms is required. Solid-state and tube amplifiers are both compatible with this load.

Alternatives

The Amira is the other 2-way floorstanding tower in linear phase from Albedo, with a 140 mm Curv mid-woofer and a silk dome tweeter.

Specifications

  • Model name

    Aptica SG

  • Frequency Response low +/- 3dB (Hz)

    45

  • Frequency Response high +/- 3dB (Hz)

    32 000

  • Sensitivity (dB at 1 W/1m)

    85

  • Impedance (Ohms)

    8

  • Power amplifier requirements (W)

    N/A

  • Has internal amplification

    N/A

  • Internal amplification power (W)

    N/A

  • Size (sm)

    19.5 x 26.5 x 102

  • Weight (kg)

    24

  • Official link

More components