Hifiverse

Floorstanding loudspeakers — Legacy Audio Aeris XD

Description, images, technical data and specifications

Legacy Audio Aeris XD
Image source - (c) Legacy Audio

The Aeris XD is a hybrid floorstanding loudspeaker from Legacy Audio of Springfield, Illinois, the company founded by chief designer Bill Dudleston. Legacy calls the application a DSP-based bi-amped hybrid dipole. Its upper range is passive and runs from an external amplifier, while the bass section has its own internal amplification.

Key specs that matter

System type is 6 driver, 4.5-way. The Dual Air Motion Tweeter System combines a 25 mm (1 in) AMT super tweeter and a 100 mm (4 in) AMT tweeter. Below them sit a 203 mm (8 in) titanium-encrusted midrange with accordion edge and a 2.7 kg magnetic structure, and a 254 mm (10 in) midwoofer with accordion edge and a 4.5 kg magnetic structure. Dual 305 mm (12 in) ultra-linear bass drivers with a 6.8 kg motor and a 254 mm (10 in) mass-loaded pneumatic passive radiator complete the complement. Crossover points are 80 Hz, 2.8 kHz and 8 kHz. Frequency response is 18 Hz - 30 kHz (±2 dB) with the 24-bit processor. Sensitivity is 95.4 dB (2.83 V/1 m), and impedance is 4 ohms, with a 10 kohm input impedance for the internal amplifier. Internal amplification is 1500 W. The upper cabinet measures 1473 x 368 x 406 mm (H x W x D) and stands on a 483 x 446 mm base. Weight is 82.6 kg each, 136.5 kg packed.

Engineering and use context

Low-frequency alignment is hybrid cardioid, dual rear ported. The midrange and midwoofer form a dipolar alignment in an open-air top section. Legacy specifies the 8 in midrange as an Italian high-efficiency unit. In the Dual AMT the new 4 in folded ribbon is mounted on the same faceplate as the 1 in AMT super tweeter, and Bill Dudleston credits this layout with more uniform dispersion. Kapton is accordion-folded into a 4 in long, 1 in wide chamber, with neodymium magnets.

The dual 12 in subwoofers are actively crossed over and time-aligned by the included Legacy Wavelet or Wavelet II processor. At idle the internal amplifiers draw a few watts, and they switch on automatically when a music signal is present.

Concealed within the cabinet, the upper-section crossover uses silver HF wiring, Clarity capacitors and oxygen-free copper point-to-point wiring with a star ground configuration. With its On/Off switch, low-voltage LEDs illuminate the crossover and the dipolar alignment through a window. Construction is rigid MDF with interlocking joinery, finished in veneers. Exotic or custom colours are available to order.

Pairing

One external channel of 15 W or greater is required for the upper range. Inputs are one pair of binding posts for the upper range and one balanced XLR input for the bass.

Alternatives

The Legacy Audio Focus XD is a 6-driver, 4-way internally powered floorstanding speaker with a 750 W ICEpower amplifier.

Specifications

  • Model name

    Aeris XD

  • Frequency Response low +/- 3dB (Hz)

    18 (+/-2dB)

  • Frequency Response high +/- 3dB (Hz)

    30000 (+/-2dB)

  • Sensitivity (dB at 1 W/1m)

    95.4

  • Impedance (Ohms)

    4

  • Power amplifier requirements (W)

    N/A

  • Has internal amplification

    Yes

  • Internal amplification power (W)

    1500

  • Size (sm)

    147.3 × 36.8 × 40.6

  • Weight (kg)

    82.5

  • Official link

More components