Hifiverse

Floorstanding loudspeakers - B&W (Bowers & Wilkins) 804 D4

Description, images, technical data and specifications

B&W (Bowers & Wilkins) 804 D4
Image source - (c) B&W (Bowers & Wilkins)

The 804 D4 is a three-way floorstanding loudspeaker in the 800 Series Diamond range from Bowers & Wilkins. Its appearance is more conventional than that of the other floorstanding models in the range, and its reverse-wrap cabinet follows the design principles of the larger 801 D4, 802 D4 and 803 D4. The US price is USD 16,000 per pair, and assembly is in the UK.

Key specs that matter

Description is a 3-way vented-box system. Drive units are one 25 mm (1 in) diamond dome high-frequency unit, one 130 mm (5 in) Continuum cone FST midrange and two 165 mm (6.5 in) Aerofoil cone bass units. Frequency range is 20 Hz - 35 kHz, and frequency response is 24 Hz - 28 kHz (±3 dB from reference axis). Sensitivity is 89 dB (on axis, 2.83 Vrms/1 m). Harmonic distortion (2nd and 3rd harmonics, 90 dB, 1 m on axis) is below 1% from 90 Hz to 20 kHz and below 0.3% from 120 Hz to 20 kHz. Nominal impedance is 8 ohms (min. 3.0 ohms). Recommended amplifier power is 50 - 200 W into 8 ohms on unclipped programme. Dimensions are 1071 x 306 x 391 mm (H x W x D), and net weight is 36.85 kg.

Engineering and use context

On top of the cabinet sits the Solid Body Tweeter-on-Top housing, milled from a single solid block of aluminium and decoupled. In its latest form it has an elongated shape with a longer tube-loading system. Below it, the midrange uses the Continuum FST cone with Biomimetic Suspension in place of a conventional fabric spider. According to Bowers & Wilkins, this suspension reduces the unwanted air pressure a fabric spider generates. Midrange decoupling keeps interference from the bass units to a minimum, and an Anti-Resonance plug is used.

Front and sides of the cabinet are formed of one continuous curve held together by a spine of solid aluminium, with the drive units at the heart of the curvature. Fewer joins give a stiffer structure, and the curved front means less baffling around the drive units. Inside, Matrix bracing of interlocking panels combines solid plywood with aluminium bracing at key stress points. An aluminium top plate carries Leather by Connolly trim, black on dark cabinets and light grey on light ones. The crossover is mounted on the rear, on a stiff aluminium spine that isolates its capacitors from air pressure inside the enclosure and acts as a heatsink. A downward-facing Flowport exits onto a solid aluminium plinth with a steel constrained-layer damping sheet and upgraded spikes. Finishes are Gloss Black, White, Satin Rosenut and Satin Walnut.

Pairing

An amplifier stable into 3 ohms is required. Speaker cable impedance should not exceed 0.1 ohms. The matching centre channel is the HTM82 D4.

Alternatives

The 803 D4 is the next floorstanding model up in the 800 Series Diamond, with two 180 mm Aerofoil cone bass units.

Specifications

More components