Hifiverse

Bookshelf Speakers - Stenheim Alumine Two

Description, images, technical data and specifications

Stenheim Alumine Two
Image source - (c) Stenheim

The Alumine Two is a passive two-way bookshelf loudspeaker from Stenheim of Switzerland, and the company describes it as the model where it all started for Stenheim. It is the smallest model of the Alumine line, which also includes the Alumine Two.Five, Three and Five and the Alumine S10 subwoofer. Above it sits the Reference line with the Reference Ultime Two, Ultime Three and Reference Statement. Stenheim gives a five-year extended warranty on registration.

Key specs that matter

Drive units are a 16.5 cm (6.5 in.) woofer with a treated paper cone and a 2.6 cm (1 in.) soft dome tweeter. The design is front bass reflex. Frequency response is 45 Hz - 30 kHz, and sensitivity is 93 dB SPL in half space. Power handling is 100 W RMS and 200 W peak, with a minimum recommended power of 5 W. Nominal impedance is 8 ohms (min. 6 ohms). Each speaker measures 330 x 230 x 275 mm (H x W x D) and weighs 17 kg. With its stand it is 1020 x 260 x 320 mm and 26.3 kg.

Engineering and use context

Construction is full aluminium, and the cabinet is critically damped. Stenheim uses a thin-wall cabinet with hidden fixings and golden ratio dimensions, and only low-volume damping materials are placed inside against cabinet resonance and internal standing waves. According to Stenheim, the thin walls maximise the internal volume compared with thick-wall wooden cabinets of the same outer size.

Its fabric dome tweeter is subtly horn loaded for higher efficiency, and the bass-mid driver is larger than expected. A high-order, phase-coherent, low-loss crossover with out-of-band roll-offs is built with high-grade components. Horn loading and this low-loss crossover together extend the system sensitivity.

An SE version uses the same cabinet and drivers with a cost-no-object crossover, upgraded or custom internal wiring and upgraded binding posts, with parts from Mundorf, Jantzen, Audyn, Myflex and Jupiter. Two optional stands are offered - the Classic Stand with a round-section steel tube and a second stand in box-section aluminium alloy. Custom finishes are Full Black, Ivory and Mocca, each with black front and rear panels.

Pairing

An amplifier of at least 5 W is required. The matching subwoofer is the Alumine S10.

Alternatives

The Stenheim Alumine Two.Five is the next step up in the Alumine line.

Specifications

  • Model name

    Alumine Two

  • Frequency Response low +/- 3dB (Hz)

    45

  • Frequency Response high +/- 3dB (Hz)

    30 000

  • Sensitivity (dB at 1 W/1m)

    93

  • Impedance (Ohms)

    8

  • Power amplifier requirements (W)

    100 - 200

  • Has internal amplification

    N/A

  • Internal amplification power (W)

    N/A

  • Size (sm)

    33 × 23 × 27.5

  • Weight (kg)

    17

  • Official link